Application:

The pump is mainly used to deal with the convey of gas-bearing materials.

So it is widely used in the occasions that the liquid level is unstable, and the liquid level is lower than that of inlet to draw the material, and also used as return in the CIP system.

And it is the necessary convey equipment in the food, chemical, pharmacy. Field.

Functions and specifications:

The design adopt the side channel principle leading to the excellent suction, sanitariality, low power, lower noise, easy to clean, and low cost to maintanance.

Shaft sealing: 
YUY sanitary priming pump seal is mechanical seal, include the stationary ring SUS316L steel embedded in grapgite structure, and the movable ring made of silicon carbide.

Material

All the part contact with medium, pump case. Pump cover and impeller are made of AISI316L stainless Steel. 
The part contact with medium: AISI316L stainless steel 
Other parts: AISI304 stainless steel 
The sealing contact with medium: EPDM

The part contact with medium is polished, and other part is glass painted or sand Blasted treatment.

Datasheet: 
Max Inlet Pressure: 0.5Mpa  

Temperature Range: -10°C to +140°C(EPDM)

Flushed mechanical seal:

Water pressure: Max0.1MPa

Water consumption: 0.25-0.5L/min

Motor

I)According to the configuration, we adapt three phase. The motor desiged 
According to the International Eltronical Commission IEC 60034. IEC60072, and comply with the 
EC requirements of "CE"marking requirement.

II). The explosion-proof motor also available, that can meet with the requirement of different 
Applications. 
III)It with excellent electric performance, and with low niose, low vibration, the protection grade is 
IP55, insulation grade is F. 
IV) The operate involtage 
≤ 3Kw, 220-240V/380-420V, / /Y 
> 3Kw, 380-420V/660-690V, / /Y 
V)Frequency 
50Hz/60Hz

VI)Operate way: Continously

VII)Running Speed: 2900r/min

PS：Performance curve could be provided!