Self Adsesive Rubber Bitumen Waterproof Membrane

Descripción del producto

Where to use

• Swimming pools, fire pools and reservoirs;
• Subways or tunnels;
• Open fires forbidden construction areas;
• SAM***0PE can be used in non exposed roofs and undergrounds;
• SAM***0AL can be used in all kinds of exposed roofs;
• SAM***0N can be used as an auxiliary material or bonding material between two incompatible places.

 
Advantages
          Self adhesive, safe and environment-friendly;

• Excellent flexibility in low temperature and elongation;
• Strong adaptability for substrate shrinkage, deformation and cracks;
• Strong self healing ability for penetration and cracks;
• Lasting bonding and sealed performance;
• Excellent water resistance.

 
Standards
ASTM D***0
 
Typical properties
 

Item		Requirement	Test method
Thickness, mm		≥1.0	ASTM D **1
Maximum load, kN/m	Longitudinal	≥4.4	ASTM D **2
	Transverse	≥4.4
Peel strength		***6 N/mm	ASTM D **3
Flexibility temperature		**9℃	ASTM C **6
Tear resistance	Longitudinal	≥*9 N	ASTM E **4
	Transverse	≥*9 N
Moisture vapor permeance		≤5.7ng/Pa.S.M.2	ASTM E *6
Sealability around nail		Pass	-
Waterproof integrity after low temperature flexibility		Pass	-
Waterproof integrity of lap seam		Pass	-
Slip resistance		Pass	-

 
Packaging
SAM***0 material is packed in rolls with plastic bags or cartons.
 

Thickness	Roll Size	Rolls / Pallet	Pallets / *0 Container
1.2 mm	*0 m2	*5	*0
1.5 mm	*0 m2	*3	*0
2.0 mm	*5 m2	*3	*0

Above quantities are indicative only. We can produce it according to your demands.
 
Storage and Transportation
SAM***0 material should be stored in well-ventilated shade place and protected from sun or rain. The temperature in stored places can not be higher than *0° C. It can not be put in more than two levels. If packed by cartons, it can not be put in more than five levels.
 
Application System
Yuhong adhesive waterproof system includes substrate, primer, membrane waterproof underlayment, protection layer.
Yuhong also provide a complete line of compatible accessories and components, including primers, pipe clamps, terminal battens and screws.
 
Surface Preparation
Surfaces should be dry, clean, smooth and free from any dusts, oil or loose particles. Cracks and uneven places need to be filled by polymer mortar.
 
Priming
Before membrane laying, substrate treating agent need to be brushed evenly and completely cover all laying places.
 
Membrane laying
After substrate treating agent drying, lay SAM***0 material according to application designs.
 
Sealing, fixing and constraining on vertical surfaces
On vertical surfaces, fix with metal battens and seal with sealants for membranes.
 
Application on protection layer
After membrane laying, apply on protection layer according to waterproof layer design.
 

País:	China
N º de Modelo:	SAM-920
Precio FOB:	2 ~ 6 / Square Meter (Negociable) Obtener el precio más reciente
Lugar de origen:	China
Precio de pedido mínimo:	2 per Square Meter
Cantidad de pedido mínimo:	5000 Square Meter
Detalle de embalaje:	Roll
El tiempo de entrega:	Within 15 days
Capacidad de suministro:	1000000 Square Meter per Year
Tipo de pago:	T/T, L/C, Western Union, PayPal
Grupo de productos :	Construction Waterproof Membrane