Precio FOB
Obtener el precio más reciente2 ~ 10 / Roll ( Negotiable )
|2000 Roll Minimum Order
País:
China
N º de Modelo:
HY
Precio FOB:
2 ~ 10 / Roll ( Negotiable ) Obtener el precio más reciente
Lugar de origen:
-
Precio de pedido mínimo:
2 per Roll
Cantidad de pedido mínimo:
2000 Roll
Detalle de embalaje:
paper carton then pallet
El tiempo de entrega:
within 10 days
Capacidad de suministro:
2000000 Square Meter per Week
Tipo de pago:
T/T, L/C
Grupo de productos :
Persona de contacto Ms. LILY
TAITOU TOWN, Weifang, Shandong
self adhesive flashing tape
Our company adopt the German technology, and the most advanced international formulations suitable for the manufacture of light steel structure waterproof anti-corrosion materials, low cost, higher than the life of the steel structure itself **2 times, environmental materials to fill gaps in the domestic steel structure waterproofing !
Product description:
The product is a kind of polymer modified asphalt materials, using polyester carpet or glass mat for the matrix, the surface covered with polyethylene film, aluminum foil or fine sand, the back is covered with a release sheet,keep the self-adhesive modified bitumen flexible and waterproof. The product has a good self-adhesive and bending properties.
Application:
Construction and other base face is simple, clean, and can be widely used in roofing, basement, bathroom, etc. waterproofing works, and for legislation to pave and stick and pipe wall (except heat pipes), bridges , and other complex environment, especially in open flame is prohibited, covert fire waterproofing works.
Product Features:
Self-adhesive modified bitumen membrane with a self-adhesive surface of the waterproofing, sealing material, divided into with base membrane and without base membrane.And one side with self-adhesive layer and two sides with layers two kinds.The self-adhesive layer has covered with release sheept. the material of realease sheet also has a few kinds. all the self-adhesive layers no need glue, just because the adhesive of itself, which is acaused by the modified bitumen. Low-temperature-resistant properties of the product, and the MTR, tunnels and the scene of the fire with the best waterproof, moisture resistance and sealing materials, also apply to pipeline waterproof, anti-corrosion works.
The detailed information:
Thickness: 1mm, 1.2mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm
Width: 1m or any wide with 1m(that's mean we can cut into any rolls)
Length: *0m, *5m, *0m, *5m
Reinforcement: polyester, fiberglass or without anything
Technical data:
[Physical
|
Thickness(mm) |
width(mm) |
Area(m2) |
|
1.2 |
***0 |
*0 |
|
1.5 |
*0 |
|
|
2.0 |
*5 |
Property
]
The product meets the industry standard JC *******9 self-adhesive plastic bitumen waterproofing membrane. The requirements to main physical properties are listed in table 2.
Table 2 physical properties
|
No. |
|
|
|||
|
1 |
PE |
AL |
N
|
||
|
2 |
Water impermeability
|
Pressure,MPa ≥ |
0.2 |
||
| País: | China |
| N º de Modelo: | HY |
| Precio FOB: | 2 ~ 10 / Roll ( Negotiable ) Obtener el precio más reciente |
| Lugar de origen: | - |
| Precio de pedido mínimo: | 2 per Roll |
| Cantidad de pedido mínimo: | 2000 Roll |
| Detalle de embalaje: | paper carton then pallet |
| El tiempo de entrega: | within 10 days |
| Capacidad de suministro: | 2000000 Square Meter per Week |
| Tipo de pago: | T/T, L/C |
| Grupo de productos : | waterproof membranes |
