Descripción del producto

1. BASIC DATA & TERMS:

Capacity: 0*4.5m/min, **0, **0 SQM/Year

Characteristic: Horizontal, continuous production,Stepless frequency control, cut by required length, Electrical Heating.

Factory Area: Around: ***0m2, temperature: Higher than *0 degree

Required Power Supply: *2 KVA and **0V/*0Hz

Manpower: **4 persons per eight (8) hour shift

Dimension: ****0****0****0mm

Machine Weight: *9T

Glue using: by glue pump, 0.***0.4KG/m2

Thickness of Steel sheet: 0.3 - 0.6mm

Thickness of EPS: *8 - **8mm

Production: Cut by length automatically, if finished production, it stops automatically

Panel Shape By customer required

2. RAW MATERIALS FOR PRODUCTION REQUIREMENTS

1. Color steel plate :

Color steel plate Thickness: 0.4—0.6mm;

Width: ***0 mm or ***0 mm;

Coil aperture: **0 mm;

Weight ≤5 mt, Epoxy Coating≥3 mt ;

Surface paint does not fall off by bending

2. EPS block: Expanded polystyrene

EPS density: ****0kg/m3;

Non-Straightness of the edge ≤ 1 mm/m;

Radian ≤ 3 mm/m;

Socket plate: ***0±1mm;

H plate: ***0±1mm;

Single plate length>5m;

Plate flat, Roughness*0N/cm2

PU glue has A, B two groups:

A group: Appearance: Yellow, viscous, homogeneous liquid

Viscosity: ND 0.4-0.7PA

B group: Appearance: Yellow, Brown, homogeneous liquid

Viscosity: ND 0.3-0.6PA

A, B group proportion normally is: 1:1.5 (different factories will be different)

Glue should be free of impurities, foaming time ****0 seconds in the inside temperature. Solidification time should be ****0 seconds.

4. Cover plates:Thickness: 0.*-.8mm, Width: *0mm, thickness: *8/*4/*5/*8mm.

3. PANEL SHAPES BY REQUIREMENTS