Precio FOB
Obtener el precio más reciente7.58 / Kilogram
|200 Kilogram Minimum Order
País:
China
N º de Modelo:
hy-9055 silicone
Precio FOB:
7.58 / Kilogram Obtener el precio más reciente
Lugar de origen:
shenzhen, China
Precio de pedido mínimo:
7.58 per Kilogram
Cantidad de pedido mínimo:
200 Kilogram
Detalle de embalaje:
25kg/drum, vaccum packing
El tiempo de entrega:
within 3 days
Capacidad de suministro:
5000 Kilogram per Day
Tipo de pago:
Western Union, L/C, T/T
Grupo de productos :
Persona de contacto Ms. Yin
Liulian Shibi, Pingdi Street, Shenzhen, Guangdong
RTV silicone for LED encapsulation
HY****5 Electronic Potting Compound
Product Feature of encapsulation
silicone ***5
HY****5# is a kind of low viscosity, Inherent flame resistance, two
components addtion cured potting silicone with heat-conducting. It
cures with both on room temperature and heated temperature. It has
the feature of the higher temperature the faster of the curing
time. It can be applied to electronic components for insulation,
waterproofing, fixed and flame retardant. The flame retardant
UL**-V0 level can be achieved. It mainly applied in electronic
components surface with materials of
PC(Poly-carbonate),PP,ABS,PVC, etc. and metal
materials.
Typical Application
HY****5# is suitable for
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
TECHNICAL
GUIDELINES
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.*8 MPa for **5 minutes.
4, The temperature influences the curing time of HY****5#. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. Suggested operation time and temperature. With temperature of *0~**0°C, the silicone will cure in *5 minutes, while in *5°C room temperature, the silicone will cure around 8 hours.
Warm Tips of RTV
silicone for electronic encapsulation:
1.The following material may hinder the curing of the product, So
pls apply after summary experiment. When necessary, pls clean the
application areas.
l Condensation silicone which not completely cured or organic tin compounds
l Sulphur, sulfide and sulfur rubber materials.
l Amine compounds as well as contains the amine materials.
l Pewters solder flux.
2. Should be sealed storage.The mixture should be used up at once, avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix ***0 evenly before using, it does not affect the performance
Any query pls feel free to ask Ms Nina Yin. **-ninayin***1(sky)
Mob: **********8
País: | China |
N º de Modelo: | hy-9055 silicone |
Precio FOB: | 7.58 / Kilogram Obtener el precio más reciente |
Lugar de origen: | shenzhen, China |
Precio de pedido mínimo: | 7.58 per Kilogram |
Cantidad de pedido mínimo: | 200 Kilogram |
Detalle de embalaje: | 25kg/drum, vaccum packing |
El tiempo de entrega: | within 3 days |
Capacidad de suministro: | 5000 Kilogram per Day |
Tipo de pago: | Western Union, L/C, T/T |
Grupo de productos : | RTV2 LED silicone |