ZP*7B rotary tablet press is intended for pressing tablets from different granular materials. Typically, this rotary tablet press is applicable to not only round tablets but also different geometrical shape tablets, double-layer and annular tablets. The tablets may have letters impressed on the both sides. The turret carries *7sets of movable punches and dies. So*7 tablets will be pressed at each revolution of the turret.

Features
1. The depth of the filling material and the thickness of the tablet can be adjusted during operation.
2. Through the hydraulic drive system, the pressure for tablet pressing can be set. With a pressure gauge attached to this rotary tablet press, the pressure value is shown to an operator directly.
3. An overload protection unit is adopted to avoid the damage of the punches and apparatus in the case of overload.
4. This rotary tablet press stops automatically.

Technical Parameters

Dies (sets) *7
Max. Pressure (kn) **0
Max. Dia. Of tablet (mm) *0
Max. Depth of fill (mm) ****5
Max. Thickness of largest table (mm) ***5
Turret speed (r/min) ****5
Length of up and down punch pole (mm) *2
Length of up punch pole (mm) **5
Length of down punch pole (mm) **0
Diameter of middle mould (mm) *2
Production capacity (pcs/h) **********0
Motor power (kW) 7.5kw or 5.5kw
Overall size (mm) **0× **0× ***0
Weight (kg) ***0