Descripción del producto
Raymond mill,Raymond grinding
mill,stone Raymond mill
Raymond mill,Raymond grinding mill,stone Raymond
mill is used to grind barite,
calcite, potash feldspar, talcum, marble, limestone, ceram and
slag below scale 7 of Moth's hardness and **0 odd sorts of
non-inflammable and non-explosive stuff in the traded of mining,
building material, chemical engineering and metallurgy for power
generation and processing. The product size is adjustable on
required in the range of ******5 meshes.
Load the stuff for
grinding evenly and continuously into the grinding chamber of the
main frame. Due to the centrifugal force in rotation, the roller
swings outward and presses closely upon the ring. The shovel
carries the stuff to the space between the roller and ring. When
the roller rolls, the stuff is thus grinded.
After being
grinded, the stuff is to be routed to the sorter along the wind
belt of the blower and the rough powder will be put back to the
grinder for regrinding. The fine powder flows into the product
cyclone collector together with airflow and is expelled from the
powder output pipe as product.
In the grinding
chamber, since the stuff may contain moisture to some extent, the
heat generated during grinding makes the moisture evaporated;
since the pipeline joints are not airtight, the external air is
sucked in and the circulation air mass increases. In order to
enable the grinder to work under negative pressures, the
increased airflow is guided to the deduster anew sequentially to
the atmosphere after purification.
TheRaymond mill,Raymond grinding mill,stone
Raymond mill is one main
products of our company. And as one of the biggest production base
in China, our company has produced the Raymond mill with better WOM
in the Raymond mill market.
Raymond mill,Raymond grinding
mill,stone Raymond mill is
applicable to the grinding and processing of more than **0 kinds of
non-flammable and non-explosive materials with hardness less than 7
and humidity less than 6% in mining, construction, chemical
industry and metallurgy, such as barite, calcite, feldspar, talcum,
marble, limestone, clay, glass. The fineness of the finished
product can be adjusted from **0 mesh to **5 mesh according to
requirements.
Technical features
ofRaymond
mill,Raymond grinding mill,stone Raymond mill
1. High-efficiency: the full use of
the jet-flow and optimized impeller structure can greatly improve
the crushing and grading efficiency, thus greatly improving the
production.
2. High grading degree: with the
frequency conversion and grading adjustment technology,
the Raymond
mill,Raymond grinding mill,stone Raymond
mill have stable and
complete grading system and the special sealing measure ,which
can efficiently prevent the leaking of the fine particles .And
the particle size can reach **0—***0monyh and the thinnest can
reach ****0monyh.
3. Low wearing: the crushing wearing
parts and the impeller of the Raymond mill mainly adopts German
technology. And with the optimized design of the inner cavity
structure and anti-abrasion and allergy materials,
the Raymond
mill has made the
lowest wearing parts and the highest purity.
Raymond mill,Raymond grinding
mill,stone Raymond mill Repair and
Maintenance
1. During the application of our Raymond mill, some personnel
shall be arranged to take responsibility of management from
beginning to end. The operators must be qualified with the
required technical knowledge of operating grinding mills. Before
the installation of this grinding mill, the persons related to
the operation should receive technical training and fully
understand the operating principle, performance and regulations
of the Raymond mill.
2. In order to guarantee the Raymond mill in a normal working
state, a safety operation system for the Maintenance of the
equipment must be established. Only in this way can the Raymond
mill be guaranteed to have a long-term and safe operation.
Meanwhile, it is necessary to have the required repairing tools,
lubricant and grease, spare parts and accessories during the
operation.
3. After some period of running, the Raymond mill should receive
an examination and repairing. The components vulnerable to worn
out, such as grinding roller, grinding ring, relieving tool etc.
should be repaired or replaced. Before and after the operation, a
careful examination should be carried out for the connecting
screws, bolts and nuts on the grinding rollers so as to find
whether they are loose or sufficiently lubricated.
4. When their application time surpassing about **0 hours, all
the rolling bearings in the roller sleeves of Raymond mill must
be cleaned, and the damaged parts should be replaced. The oiling
tool can be either a manual oiling pump or grease gun.
| País: |
China |
| N º de Modelo: |
RM130/RM103/RM082
|
| Precio FOB: |
(Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
- |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
- |
| Detalle de embalaje: |
- |
| El tiempo de entrega: |
- |
| Capacidad de suministro: |
- |
| Tipo de pago: |
- |
| Grupo de productos : |
- |
