Descripción del producto

Product overview
The QX series submersible engineering pump is manufactured as per GB/T ****9 ***0 Small-size submersible motor-pumps. This pump uses cables that are at least *0 m long. Specially designed for infrastructure construction project drainage, this pump is of a lower suction structure which enables it to completely pump water accumulated on the operation surface to the greatest extent, thus it fills in the gap in the low-power, lower suction-type and high-lift electric submersible pump. A cooling jacket is added on the motor housing of the self-cooling submersible engineering pump. Such a cooling system can reliably cool the motor no matter when the electric pump operates under or above water, thus prolonging the lifetime of the electric pump.
Product use:
It is mainly applicable to unwatering or drainage for the operation surface of the infrastructure construction project; it can also be used for farmland drainage and irrigation, garden watering, fishpond drainage and irrigation, ship bilge drainage, sprinkling irrigation, flushing, fire control, etc.
Operating conditions
1 The flow at the outlet of the electric pump shall not be greater than the rated value (i.e. the pump shall be used within the specified lift range);
2 The submergence depth shall not exceed 5 m, otherwise, it shall be stated when the order is placed;
3 The water temperature shall not exceed + *0°C;
4 The pH valve shall be 5 ~ 9;
5 The motor shall not run without water for too long time;
6 The volume ratio of solid particles in sewage shall be less than 2%, and the viscosity shall below 5 s.
MODEL:
QX*****1.1
QX******1.5
QX******2.2
QX******2.2A
QX******3
QX******3A
QX****5/**4L
QX****0/**4L
QX******4
QX*******7.5
QX******7.5
QX*****0/***5L