Descripción del producto

Pressure Transmitters EJA**8W-GHTJ4DA-DA****9EB

Overview
Measurement Types
Primary Variable Differential Pressure (DP)
Reference Accuracy
Primary Variable ±0.2% of DP Span
Rangeability
Primary Variable M-Capsule: *0:1
H-Capsule: *0:1

STANDARD SPECIFICATIONS

Refer to GS *1C*2T****0E for FOUNDATION Fieldbus communication type and GS *1C*2T****0E for
PROFIBUS PA communication type marked with 0.
Measurement Ranges:
 

Capsule	MeasurementSpan	MeasurementRange
M	2.5 to **0 kPa {**0 to ****0mmH2O}	***0 to **0 kPa {*****0 to ****0mmH2O}
H	*5 to **0 kPa {0.*5 to 5 kgf/cm2}	***0 to **0 kPa {*5 to 5 kgf/cm2}

Output Signal 0:
4 to *0 mA DC, *-wire system with digital communication
Failure Alarm:
Output status at CPU failure and hardware error;
Up-scale: **0%, *1.6 mA DC or more(standard) Down-scale: *5%, 3.2 mA DC or less
*2.5%, 3.6 mA DC or less (Optional code /F1)
Note: Applicable for Output signal code D and E
Supply Voltage 0:
*0.5 to *2 V DC for general use and flameproof type
*0.5 to *2 V DC for lightning protector (Optional code /A)
*0.5 to *0 V DC for intrinsically safe, Type n, nonincendive, or non-sparking type
*0.5 to *8 V DC for TIIS intrinsically safe type
Conditions of Communication Line 0:
Power supply voltage;
*6.4 to *2 V DC
Load resistance; See Figure 1.
Note:  In case of an intrinsically safe transmitter, external load resistance includes safety barrier resistance.
Communication distance;
2 km, when CEV polyethylene-insulated
PVC-sheathed control cables are used.
Note:  Communication distance varies depends on kind of cable.
Load capacitance; 0.*2 µF of less.
Load inductance; 3.3 mH or less.
Spacing from power line; *5 cm or more.
Input impedance of receiver connected receiving resistance;
*0 kD or more at 2.4 kHz
(See Optional Specifications for Intrinsically safe type)
Accuracy:
See Table **1, **2 and **3.
Ambient Temperature Limits:
**0 to *0 oC (**0 to **0 oF) (general-use type)
**0 to *0 oC (**2 to **0 oF) (with integral indicator)
(Note : The ambient temperature limits must be within the fill fluid operating temperature range, see table 1.)
(See Optional Specifications for Explosion-protected
types)
Ambient Temperature Effect:
See Table **1, **2 and **3.
Process Temperature Limits:
See Table 1.
(See Optional Specifications for Explosion-protected types)
Ambient Humidity Limits:
5 to **0 % R.H.(at *0 oC)
Working Pressure Range:
2.7 kPa abs{*0 mmHg abs} to flange rating pressure. For atmospheric pressure or below, see Figure 2.
Static Pressure Effect:
See Table **1, **2 and **3.
Power Supply Effect 0:
::!0.**5 %/V(*1.6 to *2 V DC, **0 D)
Mounting:
Transmitter; *-inch pipe mounting
Diaphragm seals; flange mounting
Mounting Flange Rating:
See Model and Suffix Codes.
Flanges conforming to ANSI are serrated on their gasket surfaces (ANSI B*6.5).
Note:  For model EJA**8W-GHTJ4DA-DA****9EB wetted parts material code H, T, or U, no serration is worked.
Degrees of Protection:
IP*7, NEMA4X
Explosion-protected Construction:
See Optional Specifications.
Electrical Connection:
See Model and Suffix Codes.

Pressure Transmitters EJA**8W-GHTJ4DA-DA****9EB

External Zero Adjustment 0:
Continuously adjustable Resolution; 0.*1 % of span
Zero Adjustment Limits:
Zero can be fully elevated or suppressed as long as low and high range value are within the measurement range limits of the capsule.
Tag Plate:
JIS SUS**4 or SUS**6
Weight:
*7.3 kg (*8.2 lb) Model EJA**8W-GHTJ4DA-DA****9EB with *0 mm JIS *0K flange, capillary length 5 m; with integral indicator and mounting bracket.
*2.9 kg (*0.6 lb) Model EJA**8N with **0 mm JIS *0K flange, X =**0, capillary length 5 m; with integral indicator and mounting bracket.
*0.1 kg (*4.4 lb) Model EJA**8Y with **0 mm JIS *0K flange, X =**0, capillary length 5 m; with integral indicator and mounting bracket.
Add 1.4 kg (3.1lb) for JIS SCS*4A stainless steel amplifier housing.
EMC Conformity Standards 0: ,
EN******1 Class A, Table2 (For use in industrial locations) EN********3
European Pressure Equipment Directive *7/*3/EC:
Sound Engineering Practice
Safety Requirement Standards:
EN******1
• Altitude of installation site: Max. 2,**0 m above sea level
• Installation category: I
• Pollution degree: 2
• Indoor/Outdoor use


Ordering Information
Pressure Transmitters EJA**8W-GHTJ4DA-DA****9EB
Specify the following when ordering
1. Model, suffix codes, and optional codes
2. Calibration range and units:
1) Calibration range can be specified with range value
specifications up to 5 digits
(excluding any decimal point) for low or high range limits within the range of *****0 to ****0.
2) Specify only one unit from the table, Settings when shipped.
3. Select linear or square root for output mode and display
mode.
Note:  If not specified, the instrument is shipped set for linear mode.
4. Select normal or reverse for operation mode
Note:  If not specified, the instrument is shipped in normal operation mode.
5. Display scale and units (for transmitters equipped with
integral indicator only)
Specify either 0 to **0 % or engineering unit scale and
Range and Unit for engineering units scale:
Scale range can be specified with range limit specifications up to 5 digits (excluding any decimal point) for low or
high range limits within the range of *****9 to ****9.
6. Tag Number (if required)
7. Process fluid temperature for zero compensation (if required)

País:	China
N º de Modelo:	EJA118W-GHTJ4DA-DA06-99EB
Precio FOB:	(Negociable) Obtener el precio más reciente
Lugar de origen:	-
Precio de pedido mínimo:	-
Cantidad de pedido mínimo:	-
Detalle de embalaje:	-
El tiempo de entrega:	-
Capacidad de suministro:	-
Tipo de pago:	-
Grupo de productos :	Pressure Transmitter