Descripción del producto

Fluid Controls offers a series of compact Manifolds for use with pressure and differential pressure instruments. Manifolds offer users several advantages. Firstly, they eliminate several parts used in conventional piping methods (such as valves and adaptors) and consequently result in cost savings. Secondly, their compact design also reduces space requirements for operation and installation. Thirdly, the internal porting arrangement within the Manifolds also eliminates leakage points. Manifolds : 2, 3, 5 valve construction TWO VALVE MANIFOLDS are used in pressure instruments such as pressure gauges, pressure transmitters, pressure switches, etc. THREE VALVE and FIVE VALVE MANIFOLDS are used in differential pressure instruments such as differential pressure transmitters, differential pressure switches, differential pressure gauges, etc. THREE VALVE MANIFOLDS are the most commonly used Manifolds. They could be provided with test ports on the process side and drain ports on the instrument side for drawing of the process and instrument lines respectively. FIVE VALVE MANIFOLDS are normally used with differential pressure instruments where drain valves are required on the instrument side. They are also used for flushing of the system and for the prevention of loss of expensive fluid in the impulses. Options for Mounting Seperately Mounted Manifold Direct Mounting "T" Type Manifold Direct Mounting "H" Type Manifold Co-Planar Manifold