power over ethernet POE switch with power load indicator

Descripción del producto

TP4800 series is a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5/CAT5e UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Key Features
-10/100Base-TX UTP to 100Base-FX fiber media convertion
-IEEE802.3at / IEEE802.3af PoE PSE compatible
-Built-in AC/DC power supply
-Over-current protection
-choice of SC, BiDi or other connectors for multimode and singlemode
-DIP switch to set different configurations
-LFP (Link Fault Pass-through) support

- Fiber........................................ see ordering information
 

Technical Specifications:

Data Rates:
- 10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
- 100Mbps (100Base-FX)

Input Power Requirements:
- Input voltage ........................... 100 VAC to 240 VAC
- Input frequency ................................. 47 Hz to 63 Hz

Power over Ethernet Output:
- Pin Assignment and Polarity
   For IEEE802.3af standard:
   ………………..…...4/5 (V+),7/8 (V-) (default)
   …………………or 1/2(V+),3/6(V-) (optional)
   For IEEE802.3at standard (30Watts maximum):
  ………………..…...4/5 (V+),7/8 (V-) (default)
  …………………or 1/2(V+),3/6(V-) (optional)
   For IEEE802.3at standard (50Watts maximum):
   ………..…...1/2/4/5 (V+),3/6/7/8 (V-) (default)
- Output Power…..please refer to ordering information
- Efficiency ....................................................75% min
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery
Environmental Conditions:
- Operating temperature ....................... …0℃ to 50℃
- Cooling ........................................ free air convection
- Storage temperature ...................... -20℃ to +85℃
- Operating Humidity ..........................90% max, non-condensing

Mechanical Specifications:
- Case Material........................................ Iron
- Case Color.........................................Black
- Net Weight...............................550g approx. / unit
- Dimensions................................110(W) x 40(H) x 140(L) (mm)
Do not include transceiver length

Connectors:
- AC Inlet........................................ IEC-J-4
- LAN........................................ Shielded RJ-45