Descripción del producto

Power cable on-site test system / Variable frequency Resonant system
HFRS-T

The system is in accordance with the international standard requirement, such as IEC****0, IEC****7.
The frequency adjusting range is *0Hz to **0Hz, the frequency is changed according to the load range. Normally the load can be dozens meter to multiple kilometer of power cable, and load range from several nanofarad (nF) to multiple micro farad (UF).

All components of the system are fixed on the truck, no need to install or assembling on-site. Normally the test can be started within one hour. No need lifting device. The feeding requirement is very low.

The system will not cause breakdown at object cable. Even any short circuit happen, the damage will also be very limited.

Applications:
Power Cable on-site Testing
AC withstand test, this is a repeated need for power cable in the lifetime after installed.
Routine Test
For ultra long submarine power cable test in the factory, this test will be necessary.

Advantages:
Low feeding power;
Very low noise;
Frequency range: *0Hz***0Hz;
PD Measuring is available when equips with Sin Wave feeding source;
Very low loss;
Serial connection or Parallel connection are available for several resonant system;
Easy and fast for user conducting the on-site testing;
Low cost of the system;
System can conduct non-load test itself, no need object cable;

Power cable test,submarine cable test,test system,on-site testing,high voltage,AC withstand test,routine test,test equipment,test instrument, test machine, test compression

Himalayal, always by your side.