Powder coating plant, Liquid painting line

Liquid spray system

Function: 

1,Equipment shell

Equipment shell is a closed tunnel structure, with the ends. Shell, wall board, roof using δ 1.2 mm SUS**4 stainless steel plate bend plug-and-socket welding technics; All the bottom plate adopts δ2.0 mm SUS**4 of stainless steel, the floor is using the welding closed process, stop the liquid run risk a leakage phenomenon.

2,Store liquid trough

The store liquid trough is set in the jet processing section of the lower part of the equipment shell join to form an overall structure, so that the spray washed the bath to flow directly back to the sink. The width direction stretched the device shell, so that out from the device side to install the pump suction and supplementary bath, stretched side section has a water seal compartment cover.

3,Spray device

Main contains spray pump, spray pipes, nozzles, valves, shock pressure gauge components and other components, the principle is the spray pump station bath enter the sprinkler piping, through various forms of nozzle workpiece spray and wash or spray film processing, pipeline valves and pressure gauge component is used to adjust the pump outlet pressure and flow to meet the requirements of the pre-treatment process.

4,Skim heating device

The heating device heated by the steam pipe, valves and pipes and other components

5,Phosphating tank liquid heating device

Heating device is mainly composed of corrugated plate heat exchanger, hot water circulation system, valves and piping.

6,Phosphating dregs device

The system is high by precipitation tower, phosphating filtering of pump.

7,Ventilation exhaust device

Ventilation exhaust is mainly composed of glass, steel (stainless steel) fan, duct, damper, etc..