Descripción del producto

Advantages

1. Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallic materials.
2. Large screen LCD, showing all functions and parameters. With EL background light.
3. Seven impact devices are available for special application. Automatically identify the type of impact devices.
4. Test at any angle, even upside down.
5. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
6. Large memory could store **0 groups (Relative to average times *2~1 ) information including single measured value, mean value, impact direction, impact times, material and hardness scale etc.
7. Battery information showing the rest capacity of the battery and the charge status. User calibration function.
8. Software to connect to PC via USB port.
9. Thermal printer integrated, convenient for in field printing.
*0. NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous *1. working period of no less than **0 hours (EL off and no printing). Auto power off to save energy.
*2. Outline dimensions;**2mm×*0mm×*2mm
Main Application
1. Die cavity of molds
2. Bearings and other parts
3. Failure analysis of pressure vessel, steam generator and other equipment
4. Heavy work piece
5. The installed machinery and permanently assembled parts
6. Testing surface of a small hollow space
7. Material identification in the warehouse of metallic materials
8. Rapid testing in large range and multi-measuring areas for large-scale work piece
Technical Specifications
Error and repeatability of displayed value: 
 

1. Measuring range HLD **0^**0 HLD
2. Measuring direction **0°
3. Hardness Scale HLHBHRBHRCHRAHVHS
4. Display segment LCD
5. Data memory  **0 groups max relative to impact times *2^1
6. Printing paper: width is *7.5±0.5 mm, diameter is *0mm
7. Battery pack: 6V NI-MH
8. Battery charger: 9V/**0mA
9. Continuous working period about **0 hours with backlight off, no printing
*0. Communication interface USB1.1
*1. Outline dimensions **2mm×*0mm×*2mm