Polyurethane Foam Sealant

Descripción del producto

Eco-friendly Factory Direct Supply High Expansion Rate MSDS Polyurethane Foam Adhesive Sealant
 

DESCRIPTION
Multipurpose large expansion PU foam sealant is an one-component, self-expanding,multipurpose polyurethane foam. This foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation. Higher expansion rate than normal Pu foam.
 ADVANTAGE
1.Can apply around *0 meters  ( *0mm**5mm)
2.Most cost effective for each window or door.
3.No shrinkage and cracking after cured.
4.Better adhesion and harder.

APPLICATIONS

1. Bonding and mounting.
2. Installation fixing and insulation of door and window frames
3. Filling and sealing of gaps, joint, openings and cavities.
4. Heat & cold preservation and sound insulation.
5. Packaging purpose, wrap the precious & fragile commodity, shake- proof and anti-pressure

PACKAGING

**0ml, **0ml, **0ml, **0ml four kinds can size
*2cans per carton
Two spray methods: straw type and gun type
Gross weight from **0g to ***0g as request
 STROREAGE AND SHELF LIFE
*2 months in unopened packing store in temperature between *5ºC to **5ºC, keep in cool, shade and well ventilated area.
Always keep the can with the valve pointed upwards.
 CONSTRUCTION GUIDE
1.  Shake can vigorously for one minute before use
2.  Clean and pre-moisten surface before use
3.  Firmly screw can on adapter, and turn the flow adjustment screw anticlockwise
4.  Fill vertical joints from the bottom up when half filled enough
5.  Foam begins to cure about ten minutes, wait for one hour before doing the next step.
6.  Use knife to smooth out cured foam and treat surface with cement paint or silicone.