Precio FOB
Obtener el precio más reciente10.88 ~ 13.28 USD / Kilogram ( Negotiable )
|200 Kilogram Minimum Order
País:
China
N º de Modelo:
E640
Precio FOB:
10.88 ~ 13.28 USD / Kilogram ( Negotiable ) Obtener el precio más reciente
Lugar de origen:
-
Precio de pedido mínimo:
10.88 per Kilogram
Cantidad de pedido mínimo:
200 Kilogram
Detalle de embalaje:
25kg /drum 200kg/drum
El tiempo de entrega:
3 days after receiving the bank receipt
Capacidad de suministro:
10000 Kilogram per Day
Tipo de pago:
T/T, L/C, Western Union
Grupo de productos :
Persona de contacto Ms. Bella
Building A,No 3, Hongling First Road,Liulian Shibi,Pingdi Street,Long Gang District,Shenzhen,China., Shenzhen, Guangdong
platinum molding silicone
for grc baluster  Â
Â
APPLICATIONS of platinum molding silicone for grc baluster:
platinum molding silicone for grc baluster could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Â
Datasheets of platinum molding silicone for grc baluster
Â
|
Model |
E640 |
|
Mixing proportion |
1:1 or 10:1 |
|
Hardness (A°) |
40±2 |
|
Density ( g/cm 3 ) |
1.10 |
|
Pot life (under room temperature 23°C) |
30Â mins |
|
De-mold time (hour) |
4~6 |
|
Viscosity (23 C°,mPa.s) |
6000±2000 |
|
Color |
Translucent |
|
Tear-strength (kgf/cm) |
≥15 |
|
Tensile strength(kgf/cm2) |
≥60 |
|
Elongation-break(%) |
≥ 290 |
|
Linear shrinkage (%) |
< 0.1 |
Â
FEATURES of platinum molding silicone for grc baluster:
Two-parts, flowable liquid silicon & curing agent.Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
Good tensile strength and tear strength,low shrinkage.
It gets cured at room temperature 25 0C within 5-7 hours.
An exceptional fluidity and good operability, easy to be demolded.
Suitable for pouring methods of operation for small sized molds making.
 
DESCRIPTION of platinum molding silicone for grc baluster
E620 rtv2 silicone rubber for plaster, cement mold making is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Q642 addition cure silicone rubber is mainly used for molds making for food grade products. And it is also develop to solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
OPERRATING INSTRUCTION of platinum molding silicone for grc baluster:
1.Stir part A and part B with right mixing ratio
evenly. And get the mixture for vacuum-
pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE of platinum molding silicone for grc baluster:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE of platinum molding silicone for grc baluster
Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.
| País: | China |
| N º de Modelo: | E640 |
| Precio FOB: | 10.88 ~ 13.28 / Kilogram ( Negotiable ) Obtener el precio más reciente |
| Lugar de origen: | - |
| Precio de pedido mínimo: | 10.88 per Kilogram |
| Cantidad de pedido mínimo: | 200 Kilogram |
| Detalle de embalaje: | 25kg /drum 200kg/drum |
| El tiempo de entrega: | 3 days after receiving the bank receipt |
| Capacidad de suministro: | 10000 Kilogram per Day |
| Tipo de pago: | T/T, L/C, Western Union |
| Grupo de productos : | rtv2 silicone rubber |
