Introduction

1Techniques: SMC: Sheet Molding Compound

2Connections: A comprehensive range of tank connections for site fitting

3Basic Material: Special unsaturated polyester resin

4Reinforcing material: Fiberglass, glass fiber and glass mat

5Auxiliary Material:Gel coat resin, firming agent,accelerating agent and abrasive material

6Panels are designed using computer aided design technology and suitable for temperatures of *0°C and humid condition of up to *1°C saturated. Mixture of Unsaturated Polyester Resin, glass-fiber, filler, mold release agent, catalyst, etc. are pressed by hydraulic press machine under high temperature and assembled with bolts and reinforcement materials at the job site

7The water contained in the water tank meets the national water quality standard - "The Water Standard for Domestic Living"

8Capacity or Measure or size: *****0m3, SMC sectional Tanks can be assembled to various capacities from ***0 liters to 1 million liters by selecting the desired length and width from 1m to *0m, and height from 1m to 4m

9 Color: White,or others

The major advantages and Characteristics

1) Light weight, high strength

2) Leak-proof /Water Tightness: Due to the material is fiberglass reinforce plastic with high density, and the sealing tape is high performance with non toxic, so it's leak-proof tank

3) Long durable time: the maximum distortion of the sidewall is less than 1 percent for the height; maximum distortion of the bottom center is less than *0mm. The normal durable lifetime is more than *0 years

4) Corrosion resisting; anti-rusted

5) Easy to clean and maintenance management convenient

Specification

Water tank size 1.0*1.0*1.0m, 1.0*2.0*1.0m, 1.0*3.0*1.5m, etc

SMC board size: 0.5m*0.5m, 1.0*0.5m,1.0*1.0m, 1m*5m,5m*5m

Wall board thickness: 5mm,8mm,*0mm,*2mm,*4mm,*6mm etc

Physical properties

Accessories and specifications

1. Support for Panels: The panels shall be supported externally or internally by an adequate support system. External Reinforcement - Hot Dipped Galvanized Steel
Internal Reinforcement - Hot Dipped Galvanized or Stainless Steel **4 rod support and tie-rod

2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products. It maintains soft itself and adhesives even at low temperatures

3. Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel **4

4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel **4

5. Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent

6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage. The concave drain panel has been designed to ensure the periodic cleaning and inspection of tank

7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter

8. Man-hole opening & Inspection Hatches: the size can be customized; normally it is supplied with a standard size of: **0 x **0mm. the opening can be designs of bolt, seal-tight locking arrangement

9. ABS roof vent with PE insect screen

*0. Float level indicator, optional SS**4 for internal and external support structure are available on request

Why choose us?
1Highest quality
We are the manufacture who adopts import raw materials.  It is amazing, and with cheap price and guaranteed quality
2Most competitive price
We can adjustment the price according to your market demand’s changes,and also can launch a series of promotional activities in a bad economic environment
3Professional
We are special in producing and sells, as development, methods, and handling
4Best service
Answering emails or solving questions timely. Delivery and update information on time