paint

Descripción del producto

COCKATOO **0% Acrylic (water-based) Description COCKATOO FEATHER FLAT is acrylic emulsion paint for interior surfaces. It has a soft velvet matt finish suitable for use on ceilings and wall in bedrooms, living rooms and other low to medium traffic areas. Recommended uses COCKATOO FEATHER FLAT is acrylic emulsion paint for interior surfaces. It has a soft velvet matt finish suitable for use on ceilings and wall in bedrooms, living rooms and other low to medium traffic areas. Surface Preparation 1. For new cement render, concrete wall surfaces should be ventilate and dry, water proportion below *0% and PH below *0. The surface must be firm before troweling putty; sand dust, cracks or loosing should be forbidden. 2. Interior putty should not be softened or expanded by water, no powdering by hand touching; after the dry of putty, it should be rubdown by sand paper, and dust off with wet cloth, and paint as soon as possible. 3. Remove grease, dust and dirt by thoroughly washing the surface with a liquid detergent and warm water, followed by a rinse with clean water. All loose, peeling and flaking material must be removed with a scraper. Sand the surface smooth and remove until all gloss is removed. Fill holes and cracks with a suitable filler and sand lightly to an even finish. Application Use brush, roller or spray devices to paint two coatings. Drying and recoating touch dry under normal conditions in about *0 minutes. It may be recoated after 2 hours. Dry times may be lengthened in cold or humid conditions. General Data Finish: soft velvet matt Resin Type Acrylic Flash point non-flammable Recommended film Thickness?per coat ?? Coverage ****6 square meters per liter depending on film thickness and surface porosity Cleaning with cold water away from drains Thinning Up to 2% with water if required Drying Time Touch dry *0 minutes Recoat*- after 2 hours (dry times may be lengthened in cold or humid conditions) Temperature Range: *0°C**5°C