Precio FOB
Obtener el precio más reciente5 ~ 10 / Piece ( Negotiable )
|1000 Piece Minimum Order
País:
China
N º de Modelo:
OL-8
Precio FOB:
5 ~ 10 / Piece ( Negotiable )Obtener el precio más reciente
Lugar de origen:
Jiangsu, China (Mainland)
Precio de pedido mínimo:
5 per Piece
Cantidad de pedido mínimo:
1000 Piece
Detalle de embalaje:
Seaworthy package, strapped bundle wrapped in plastic.
El tiempo de entrega:
production leading time 30 days
Capacidad de suministro:
100000 Piece per Month
Tipo de pago:
T/T
Grupo de productos :
Persona de contacto Ms. c
No. 80, North Henggang Road, Taizhou, Jiangsu
Oxygen Lance Pipe,are small diameter pipes used with oxygen is an
invaluable tool for the primary metals industry. It is used daily
in almost all ferrous and non-ferrous primary production
facilities.This small diameter pipe serves below purposes for these
industries:Oxygen lance tube for decarburize:  Carbon and
other chemical constituents impart certain attributes or properties
to a metal and these elements must therefore be carefully measured
and controlled during the smelting process. Employed in blast
furnaces, basic oxygen furnaces as well as induction and electric
arc furnaces, oxygen lance tube is used for decarburize i.e. a
process of pumping an oxygen rich mixture at high pressure through
oxygen lance tube into the melt. The oxidizing effect burns off the
excess carbon in the molten metal thus reducing the percentage of
carbon to an acceptable level.
Oxygen lance
tube are used for opening furnace tap
holes:  When
the desired steel composition and temperature has been reached, the
furnace tap hole is opened through a combination of drilling and
tapping using oxygen lances. Lances are coupled to a high pressure
oxygen supply, the end of the lance is ignited and through careful
and skillful manipulation, the tap hole clay which can be up to
**0mm thick is effectively burnt away, facilitating the pouring of
the molten metal for further processing.
Oxygen lance
tube for cleaning ladle well blocks:  
Ladle well blocks require cleaning once the casting process has
been completed. Ladles are tipped to remove the slag. Oxygen lances
are employed to clean both the upper and lower nozzles and if
necessary, the bottom of the ladle is also cleaned with a lance
tube if it contains impacted debris.
Oxygen lance
tube are used for unclogging tundish
nozzles:  Tundishes
are receptacles used to temporarily store a batch (melt) of molten
metal while it is moved through the production process. Unclogging
nozzles with oxygen lance tube is a more cost effective option than
replacing entire nozzle systems.
Oxygen lance
tube are used for cutting skulls  
Oxygen lances are used effectively to cut and clean skulls which
are layers of slag and process metals that have solidified or
frozen against the refractory material forming a layer of
insulation which reduces heat losses and protects the furnace
lining from erosion, chemical attacks and thermal shock.
País: | China |
N º de Modelo: | OL-8 |
Precio FOB: | 5 ~ 10 / Piece ( Negotiable ) Obtener el precio más reciente |
Lugar de origen: | Jiangsu, China (Mainland) |
Precio de pedido mínimo: | 5 per Piece |
Cantidad de pedido mínimo: | 1000 Piece |
Detalle de embalaje: | Seaworthy package, strapped bundle wrapped in plastic. |
El tiempo de entrega: | production leading time 30 days |
Capacidad de suministro: | 100000 Piece per Month |
Tipo de pago: | T/T |
Grupo de productos : | Oxygen Lance Pipe |