netLINK Series *0/**0M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between *0/**0M UTP interface (TX) and **0M Fiber interface (FX). The traditional *0/**0M Fast Ethernet can be extended to the distance of *0km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users.

• The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
• Auto negotiation function allows UTP port to auto select *0M or **0M and Full Duplex or Half Duplex.
• UTP port supports MDI / MDI-X auto crossover
• Supporting flow control
• Supporting ***2 Byte packet
• Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
• Design of internal or external power supply for selection by users

• Operating standards: IEEE**2.3u, *0/**0Base-TX and **0Base-FX
• MAC address table: 1K
• Connector:
  • UTP: RJ**5 *0/**0Mbps; 
  • Fiber: SC **0Mbps
• Cable:
  • UTP: Cat. 5 UTP (the max distance up to **0m)
  • Fiber(Singlemode): 8.3/**5, 8.7/**5, 9/**5, *0/**5μm(the max distance up to *0km)
• Flow Control
  • Full Duplex: IEEE**2.3x
  • Half Duplex: Backpressure 
• LED: Power, FX **0, FX Link/Act, TX **0, TX FDX, TX Link/Act.
• Power: AC **0V - **0V to DC 5V; DC*8V to DC 5V 
• Ambient temperature：0 ～ *0℃
• Storage temperature：**0 ～ **0℃
• Humidity: 5% ～ *0%
• Dimensions:
  • Internal power: *0×**0×**0mm
  • External power: *6×*0×*3mm