Descripción del producto

OBO type LY*-(D)1 Class D 4P power supply surge protective(SPD)

Product Description:
LY*-(D)1 series surge protective device is suitable for TN-S,TN-C-S,TT,IT etc power supply system of AC *0/*0Hz, **0V and below, installed on the joint of LPZZ1or  LPZ2 and LPZ3 zone, which protects the electric network not shocked by the thunder and lightning, it's design is according to GB****2.1, IEC******1.

Product feature:
1.Could be replaced for the module not need power cut.
2.Maximum current of endure the lightning stroke*0KA(8/*0µs).
3.Time of response<*5ns.
4.The color of visible window shows operating status,green means normal,red means abnormal.

Application Scope and installation Position
It's suitable for D grade lightning-proof,LY*-(D)1 series surge protective according to GB*****1.*****2,installed on the joint of LPZ1 or LPZ2 and LPZ3,usually installed in household distribution boards, 
computer equipment, information equipment, electronic equipment and in the socket box in front of control 
equipment or near the control equipment.Notification for design and ordering: during the product design and ordering, user shall indicate the product series, 
model and quantity in detail. For example: Series 1 LY*-D*0/****5,**0 pieces.

Main technical parameters:

Techinical parameters Model   LY*-D Rated operating voltage Un(V~) **0V **0V **0V **0V Maximum continuous operating voltage Uc **5V **5V **0V **5V Voltage protection level up(V~) KV ≤0.7 ≤1.0 ≤1.2 ≤1.5 Nominal discharge current In(8/*0μs)KA 5 *0 Maximum discharge current Imax(8/*0μs)KA *0 *0 Response times <*5 Test standard GB****2.1   IEC******1 The cross section of L/N line 6 The cross section of PE line *6 Fuse of switch(A) *0A, *6A *6A,*5A Operating environment°C **0°C~*5°C Relative humudity(*5°C) ≤*5% Installation Standard rail *5mm Material of outer covering

  Fiber glass reinforced plastic