Professional to provide wellhead, joint station and gas station
such as natural gas and gas purification and dewatering
device.
Almost all of the natural gas wellhead flowing by gas phase water
saturation, even carry a certain amount of liquid water. The
presence of water in natural gas will often cause serious
consequences: the presence of water containing CO2 and H2S gas
formation under the condition of acid and the corrosion of pipeline
and equipment; Natural gas hydrate formed under certain conditions
and plug valves, pipes and equipment; Reduce the pipeline
transmission capacity, causing unnecessary power consumption. The
existence of water in natural gas is a very bad thing, therefore,
more demanding need of dehydration.
Operating Principle:
Gas through the front filter dust, in addition to the water, the
adsorption tower, using adsorbent super absorbency properties in
low temperature and moisture in the gas adsorption, again through
the rear filter shaker, achieve the goal of purification of natural
gas. When the adsorption tower the tower adsorbent tends to
saturation, need to take off the attached (regeneration), at this
time to switch to another tower adsorption; After a small amount of
purification of natural gas through the circulation fan pressure,
then through heating into regeneration tower, regeneration tower
water by high temperature gas out of the tower body, and after
cooling and separation in addition to the water enters the
adsorption tower, achieve the goal of regenerative without
air.
Product features:
1, the structure of the twin towers, the pressure fluctuation is
small, low noise, safe and effective;
2, the machine can realize semi-automatic, automatic operation, the
operation failure rate is low;
3, reserved dew point detection interface, which can realize
on-line monitoring;
4, able to design and manufacture according to user
requirements;
Installation process and application scope:
Main air from the air inlet bullishness of liquid separator into A
tower, gas dehydration after the rear filter have the outlet;
Regeneration loop flow, gas through the circulation fan into
heater, entered B tower regeneration after heating up, and then
into the cooler, then through the separator gas water separation
function back to the circulation fan inlet.
1, adapted to the medium flow rate;
2, is suitable for the vehicle gas medium moisture content of LPG
stations
3, low in the high-pressure design;
4, automotive gas drying, dry gas pipeline door
station;
5, don't stop all the work;
Two tower plant regeneration process automatic, semi-automatic type
switch professional site for manual operation. This automatic
regeneration combined with personnel manual operation process, the
versatility is strong, good controllability, stable and reliable,
flexible and regeneration of the characteristics of low gas
consumption. Mother is a normal son QiZhan preferred model. Type
automatic dewatering device in full automatic control process, the
scene does not need to staff, safe and reliable operation, to adapt
to demand a high degree of automation of LPG stations.