mould making liquid silicone rubber rtv2 for big size gypsum/plaster/ornament mould

Descripción del producto

GS-C*5 big size gypsum mould making liquid silicone rubber    

1.Description of GS-C*5 mold making silicone rubber

GS-C*5 Silicone rubber is tin cure silicone rubber for mold making.It is liquid rtv*2 silicone rubber for mold making for stone mold .The silicone rubber will be cured under room temperature, Its two-components, the mixing ratio is **0:2 . Part A is a flowable liquid silicone , part B is the catalyst. It has an exceptional fluidity and good operability.

2.Characteristics of GS-C*5 mold making silicone rubber

*An exceptional fluidity and good operability, easy to demold
*Good tensile strength and tear strength
*soft hardness
*copy detailed pattern 
*good flexibility

*eco-friendly

*long shelf-time &lifetime

3.Application of  GS-C*5 mold making silicone rubber

GS-C*5 silicone rubber is perfect molding material, it is suitable to make big mold for concrete stone, cement casting , gypsum mould, plaster product, resin craft, soap,candle, bronze casting, wax, crystal, tyre mold ,shoe mold ,clay casting ,soap mold,ceramic casting ,etc.

GS-C*5 Silicone rubber is mainly suitable for big size plaster casting mold and gypsum casting mold with simple pattern.

4. Using instructions of GS-C*5 mold making silicone rubber

Step 1: prepare and clean the prototype.
You must make sure your original molds perfect. fix the original mold on a board , then using some assistant material(like cardpaper) to make a frame for to surround the prototype. The frame is no need ,if we make the mold by brushing way .

Step 2: Take the silicone and catalyst as the ratio **0:2 (silicone:catalyst=**0:2) ,mix the silicone rubber and catalyst evenly. 
*Notes: Molding silicon rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicon rubber will be partly solidified and this will bring troubles for your final operation. Whats more, the finished molds will have a short life. All of these will cause a waste of silicon rubber.

Step 3: Vacuum pumping

After mixed the silicone evenly, it is better to release the bubble by Vacuum pumping.

Step 4: Pouring cast or brushing cast

After released the bubble, we can pour/brush the silicone rubber on the prototype 
*Notes:Please finished all the steped within the operation time .If not it will cause cross linking reaction, and no more further steps will be available.So,we have to pay attention to the pot life and curing time.

5. Package and shelf life of  GS-C*5 mold making silicone rubber

Package

1kg/drum,5kgs/drum,*0kgs/drum,*5kgs/drum,**0kgs/drum.

Shelf life and transportation
1. Twelve(*2) months when stored at *5C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.

Any questions, pls feel free to contact us, it will be our great pleasure at service for you:

E-mail: *@********************span>

Mobile: ***************0

Whatsapp: ***************0