Metal Entrance Doors with MDF panel TM Blockpost: serie Standart

Descripción del producto

♦ Frame: bent sheet of metal with the fourth of 1.**2.0mm, thickness **0mm, ball bearing barrel hinges (3 or 6 pcs).                                                                    ♦ Leaf: metal 1.8mm, thickness *2 mm, metal sheet on the leaf 0.8mm, mineral wool filling *0 мм.                                                                
♦ MDF panel: outside and inside *6mm, two circuits of improved gasket.          ♦ Hardware:separate door handle, locks KALE, mortise armor escutcheons
   Standart sizes: 1 leaf (***0***0, ***0***0), 2 leaves ***0****0.

Cover outside/inside: Vinorit  film  + moisture resistant plate (2 sides); Mat film (2 sides); Vinorit film + moisture resistant plate from the outside / mat film internal side



Additional information about us:
We produce doors from bent sheet of metal. We can make any door (we work with non-standard sizes). Maximal construction size is ***0****0 mm
Any hardware, we can customize your doors individually.
Locks setfrom *0 to *6 dead bolts, for example (KALE, FUARO, APEX, MOTTURA, MULTICLOCK).
The minimum orderis from *0 doors
For the doors of all series, it's possible to add a lot of additional options, calculate and manufacture any doors according to your own sketch (photo, picture or technical characteristics), it's possible to make the frame structure and the door leaf from the profile pipe.