Descripción del producto
Features:
1, can be used both in the positive
and back water sides, mixed with concrete, the effective age is
the same to the structure.
2, can be operated on the wet
surface, finished after *8h can fill back, no requirement for
protective layer
3, can harsh the contraction crack
under 0.4mm, penetrate deep can be above *5cm, and the deepen
with the time changes, can stand the corrosion of aggressive
groundwater, oxygen ions, sulfate, nitrate, and protect the
concrete and steel
4, detected by the health
inspection CHA department and the New York MDDH U.S. EPA approved
as non-toxic products, can be directly used for drinking and food
industry construction
5, no particular protection when
filling back or tying bar, strengthen network or other usual
procedures.
6, when with concrete, bricks,
mortar and stone materials are in one hundred percent compatible,
and will not tear, puncture or break away from the joint
displacement
Application:
1, waterproof projects for
basements, underground storages, parking places, underground
consistent walls and lift shaft grooves and so on
2, the concrete protection for
seaports and waterproof projects for reservoir, dams, bridges,
driveways, and carrying traffic structures
3, waterproof projects for
kitchens, drinking-water tanks, sewage treatment pounds and
sewage channels
Waterproof Principle:
Adopting the technology from
America nuclear industry, starting from molecular physics, making
research about the interaction and the movement of the molecule,
introducing the concept of alike molecular sieve and infiltration
crystallization, making the waterproof materials hold the
molecular sieve, gaining the effect of breathable while prevent
water, and ensure the waterproof layer own high anti-infiltration
function.
This material is based on
cement, so it can bond with concrete effectively and with the
inorganic substance which can make silicate lattice change and
re-crystallization, it can perpetrate into the concrete surface,
and this can not only improve the waterproof layer the adhesion
towards structure body, but also improve the function of
anti-infiltration. Thanks to the infiltration crystallization of
the inorganic, under the water and inorganic substance, the
silicate lattice can formulate new crystal along the crack so as
to harsh the pipe. Similarly, when the waterproof layer makes
crack by external damage, the insider skeletal material crystal
lattice under water and inorganic substance will make change and
re-crystallized to harsh the crack gain the effect of
self-repair.
Operation Process:
1, clean and moist the surface
before operation, try to keep it under saturation state
2, ratio: powder: additive:
water=*5kg: *8kg: 1kg, mix them with electric mixer evenly (about
3~5min)
3, wipe out the obvious water of
the surface, clean the edge and other complex parts, then smooth
the surface, pay attention to the brushing direction, brushing
alternatively, after one layer dry then make the second time, 3~4
times are the basic need in order to meet the requirement. For
the special parts, cover non-woven fiberglass or fiber
Normal Amount:
1, for civil buildings, brush three
times, thickness about 1.2~1.5mm, according to the surface, about
*7~*5m2/set
2, huge projects as metros,
tunnels, dams brush 4~5 times, thickness 2~3mm, according to the
surface, about *0~*5m2/set
| País: |
China |
| N º de Modelo: |
Mebong MB Efficient
|
| Precio FOB: |
(Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
- |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
1 ton |
| Detalle de embalaje: |
- |
| El tiempo de entrega: |
- |
| Capacidad de suministro: |
500 tons/ month |
| Tipo de pago: |
- |
| Grupo de productos : |
- |
