Descripción del producto
Brief Description/Features of
Manual Molding Silicone
Rubber
Manual molding silicone
rubber
1. Good
elasticity
2.
Non-deformation
3. Heat
resistance
4. Low
shrinkage
a. Applications of Manual
Molding Silicone
Rubber
Manual Molding Silicone
Rubberis
mainly u, sed for model design of manual mold, PVC plastic molds,
cement products, low melting point alloy moldsalloy toys, plastic
toys, electronics, handicrafts, stationery, large-scale
sculpture, reproduction of cultural relic, shoe sole molds, pad
printing allocation, Electronic equipment ant vibration,
etc.
b. Model Codes of Manual Molding Silicone
Rubber
HY***8# is
applicable to make molds of smaller products and the production
will be **3
pieces.
HY***0#, compared
to other two types, for its moderate hardness and better quality
& performance, its production will be ****0
pieces.
HY***0# is
applicable to large size products duplications
andElectronic
equipment ant
vibration.
c. Operation Instructions
forManual
Molding Silicone
Rubber
RTV*2 Manual Molding Silicone
Rubberis
a flow able liquid, and the quality has nothing to do with the
color. It consists of two commonest. Part A is a flow able liquid
silicone rubber, part B is the curing agent. Firstly, after your
previous work of dealing with the original model, take some
liquid silicone rubber , add 2%*3% curing agent of the amount of
silicon, and mix them evenly. Then after vacuum-pumping the
mixture, you can pour it into the mold frame. The silicone mold
will cured in **3
hours.
Note:The
time for vacuum-pumping should be less than 3 to 5 minutes,
otherwise, once the silicone rubber has cross-link reaction
during vacuum zing, it will not be
operated.
FAQ of manual molding silicone rubber
–
How to prevent
silicone manual molds getting sticky?
The main reason
for this problem is that you do not handle the products or
original molds well, and then you should deal with the original
mold or products carefully before molding. Such as for the
products with a complicated pattern or an unsmoothed surface, you
should polish and clean the products, after which it will be
molded, then spray the release agent. Normally, the release agent
can be Vaseline, detergent, liquid wax, etc. In practical
process, you can bush different release agent according to
different material.
The second
reason is that the operator pours the silicone into the mold when
the mixture is mixed evenly, then the finish silicone mold will
not cure and dry entirely.
Further information
onManual Molding Silicone
Rubber is available. Please feel free to
contact Rose.
Mobile: ***************5
Tel: ****************4
Fax:
****************0
Email: newstarf(at)hotmail(dot)com
Skype: LuoYan***2
| País: |
China |
| N º de Modelo: |
N3528, N3540 manual mold silicone r
|
| Precio FOB: |
5.6 ~ 7.2 / Kilogram (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
Guangdong China |
| Precio de pedido mínimo: |
5.6 per Kilogram |
| Cantidad de pedido mínimo: |
200 Kilogram |
| Detalle de embalaje: |
25kg/drum and 200kg/drum |
| El tiempo de entrega: |
within 5 days after payment confirmed in our bank. |
| Capacidad de suministro: |
8000 Kilogram per Day |
| Tipo de pago: |
T/T, L/C, Western Union |
| Grupo de productos : |
Manual Molding Silicone Rubber
|
