Descripción del producto

~                             

******************************************************************************************************-

Voltage: DC**2V

Coin Diameter: *8mm~*1mm

Coin Thickness: 1.2mm~3.1mm

 

1.     Put on sample coin. 

2.     Adjust entry slot opening to your coin size by loosening screw on the back of

      metal panel for blocking bigger invalid coin from inserting.

3.     Turn the screw on front lid in clockwise direction for ditching thinner coin

      through the slot of lid if necessary.

4.     switch to Normal Open (N.O.) or Normal close (N.C) for signal output of coin  validation upon Host requested .

5.     3 triggering TIMER SWITCH of Pulse Duration ,

       Long duration of Pulse    : **0ms

       Common duration of Pulse : *0ms

       Short duration of Pulse    :*0ms

6.     VR tuning for tolerance of coin acceptance , turn clockwise for slack and anti-

       clockwise for precise acceptance.

7.     Shift sensitivity switch of coin acceptance downward to special to extend

      the range of discriminated ratio for twin metal coins or the coins in big     

      tolerance.