Descripción del producto

LPe***0 4Gb/s Fibre Channel PCI Express Single Channel Host Bus Adapter Key features: Exceptional performance and full-duplex data throughput Comprehensive virtualization capabilities with support for N-Port ID Virtualization (NPIV) Simplified installation and configuration using common HBA drivers and AutoPilot Installer® Efficient administration via Emulex OneCommand™ Manager for HBAs anywhere in the SAN Common driver model eases management and enables upgrades independent of HBA firmware Key benefits: Superior quality and reliability ensures data availability Highly efficient installation accelerates deployment and reduces administration costs Maximum SAN performance increases scalability and user satisfaction Robust interoperability simplifies deployment and upgrades of SAN hardware and software LightPulse Virtual HBA technology provides efficient host utilization and compliance with SAN management best practices Advanced security protects the SAN from potential threats such as WWN spoofing, host masquerading, rogue/compromised servers and administrator errors Standards: ANSI Fibre Channel: FC-PH*3, FC-PI*2, FC-FS, FC-AL*2, FC-GS*4, FC-FLA, FC-PLDA, FC-SP, FC-TAPE, FCP*2, and RFC ***5 (IP over FC) PCI Express base spec 1.0a PCI Express card electromechanical spec 1.0a Fibre Channel class 2 and 3 PHP hot plug-hot swap Architecture: Single-channel 4Gb/s, 2Gb/s or 1Gb/s FC Link speeds automatically detected Integrated data buffer and code space memory Comprehensive OS Support: Windows, Linux, NetWare, VMware View OS versions and available drivers Hardware Environments x*6, x*4 and Intel® Itanium® **-bit processor family Optical: Data rates: 1.***5, 2.**5 and 4.*5Gb/s (auto-detected) Optics: Short wave lasers with LC type connector Cable: *0/**5 microns, up to **0 meters at 4Gb/s *2.5/**5 microns, up to *0 meters at 4Gb/s Physical Dimensions: Short, low profile MD2 form factor card **7.*4mm x *4.*2mm (6.*0" x 2.*4") Standard bracket (low profile available) Power & Environmental Requirements: Volts: *3.3 Operating temperature: 0° to *5°C (*2° to **1°F) Airflow required: **0 lf/m Storage temperature: **0° to *0°C (**0° to **8°F) Relative humidity: 5% to *5% non-condensing Agency Approvals: Class 1 Laser Product per DHHS *1CFR (J) and EN******1 UL recognized to UL ******1 CUR recognized to CSA*2.2, No. *********3 TUV certified to EN******1 FCC rules, Part *5, Class A ICES***3, Class A EMC Directive ***4/**8/EEC (CE Mark) EN****2, Class A EN****4 Australian EMC Framework (C-Tick Mark) AS/NZS CISPR*2, Class A VCCI, Class A MIC (Korea), Class A BSMI (Taiwan), Class A RoHS Compliant (Directive ***2/*5/EC) for environmental requirements Ordering Information: LPe****-F4 - Single-channel, embedded multi-mode optic interface Additional Features: Emulex LightPulse technology features Frame-level Multiplexing and out-of-order frame reassembly for maximum link utilization. End-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting ensure that data is safe from corruption. Detailed real-time event logging and tracing enables quick diagnosis of SAN problems. Universal Boot capability allows the appropriate boot environment to be automatically selected for any given OS. Strong authentication between host and fabric is based on full Fibre Channel Security Protocol (FC-SP) Diffie-Helmann Challenge Handshake Authentication Protocol (DH-CHAP) compliance Other items LPE***0 4Gbps FC Single port PcIe 4X HBA LPE****0 4Gbps FC Single port PcIe 4X HBA LPE****2 4Gbps FC Dual port PcIe 4X HBA LPE****0 8Gbps FC Single port PcIe 8X HBA LPE****2 8Gbps FC Dual port PcIe 8X HBA