Descripción del producto

Intergrade Unpressurized solar water heater ;

1. Inner tank: 0.4mm*0.6mm thickness SUS

****2B Stainless steel

2. Tank diameter: **0mm/**0mm outer tank,

**0mm/**0mm inner tank

3. Vacuum tube: ******0mm/******0mm

4. Outer tank: 0.*1mm*0.4mm thickness

Stainless Steel/Color Steel

5. Frame: Stainless/1.5mm thickness

Galvanized Steel

6. The material of insulation: ****0mm

thickness Polyurethane

7. The reflector: Stainless steel /Aluminum

plate

8. Working efficiency: >*5%

9. Heat Preservation time: ****6hours

*0. Hail resistance: *5mm

*1. Inlet/oulet size: 1/2'', 3/4''

*2. Tank capacity:

**0L/**0L/**5L/**5L/**0L/**5L/**0L/**0L/2

*5L/**0L

*3. Air vent: **0% copper vent

 

How it works

The design of this type uses the all-glass evacuated solar collector tubes as the heat absorb element. The high vacuum degree of the clearance between the outer and inner tube can reduce the heat emission which caused by convection and conduction to a very low level. All-glass evacuated tube transfers sun energy into heat energy by high absorption rate and low emittance rate of layer films. Depend on the different density between the hot water and the cold water, a cycle created in the tube which hot water ascending and cold water descending status. Keeping natural circulation like this, the water in the tank will be heated.