LLDPE

Descripción del producto

~LLDPE Linear low density polyethylene
Appearance: White/transparent granules

Grade:
1. Blow molding grade,
2. Injection molding grade,
3. Film grade;
4. Extrusion grade.

APPLICATION:
1. Fiber (Carpet, Textiles, Upholstery, etc. )
2. Film (Shopping bags, casting film, multilayer film, etc. )
3. Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
4. Extrusion Molding (Sheet, Pipe, Wire & Cable, etc. )
5. Injection Molding (Automotive, Electronic, Construction, House wares, Furniture, Toys, etc. )

No. item-name unit typical value test methods
1 melt phase polycondensation g/*0min 1.3 GB/T***1.*1 IEC********1
2 density g/cm3 0.**5 GB***3 ASTM D***5
3 Tensile Strength MPa *6.5 GB***0 IEC********1
4 elongation at break % **0 GB***0  
5 Low elongation at break % **5 GB/T***1.*3 IEC********4
6 Resistance to environmental stress cracking piece 0/*0 GB***0 IEC********4
7 Low-temperature impact brittleness temperature **6 °C breakage h >**0 GB/T***1.*9 IEC********1
8 **0 °C oxidation induction min *0 GB/T***1.*7  
9 Carbon black content % 2.*2 GB/T***1.*6 IEC********1
*0 carbon black dispersion fen 8 GB****5  
*1 Dielectric strength MV/m *3.5 GB***8 IEC****3
*2 electric volume resistivity Ω.m 6.5×***4 GB***0 IEC****7
*3 dielectric constant   2.*5 GB***9 IEC****0