Descripción del producto

 The Deeter Leak Detector comprises a Leak Detect Controller and a series of Leak Sensors connected in a chain to the Controller via a *-core cable. The Sensors will detect a conductive liquid (e.g. water leak) between a pair of probes on their underside. The Controller will respond to a leak detected at any one of the Sensors.

The Controller provides an LED indication of wet or dry conditions and will also detect a fault, should one occur, in the sensor cable. The Controller provides three outputs (two SPDT relays and an open-collector transistor) that may be used to directly drive pumps and alarms, or may be used to interface to other equipment, such as Programmable Logic Controllers, Building Management Systems, and dial-up alarms systems.

Power to the Controller can be from a mains supply (******0VAC) or a lowvoltage supply (****4V), either AC or DC. Power to the Sensors is provided by the *-core linking cable.

The Controller is housed in a UL**-V0 flame retardant case that will fit on a *5mm DIN rail. All s and outputs are via screw terminals.

Sensors come in an IP*5 ABS enclosure and are simple to connect using cable lengths to suit the installation. Screw terminals are provided for the three wires in and the three wires out to the next Sensor in the chain.