KRD series mass and centroid measuring table

Descripción del producto

System features:
★the multi-support point measurement method is adopted, the measurement system does not require high leveling, it only needs a leveling process when the equipment is installed, and it does not need to be leveled in the future, so it is convenient to use.
★The linear guide rail is designed on the table. The two brackets can not only move back and forth very flexibly, but also have high positioning accuracy. The specimen can be installed in any position on the bracket flexibly and conveniently.
★The mounting bracket can be adjusted up and down to facilitate the installation of large range diameter specimens and conical specimens. The position of the left and right bracket is adjusted with the lead screw, which can easily adjust the conical specimen on the bracket；
★The measuring table adopts high-precision calibration parts, which can accurately calibrate the sensor position and system accuracy, and realize the self-calibration of the equipment。
★Product hoisting, can measure quality, centroid and quality deviation. When measuring, only need to rotate the specimen to 0°,*0°,**0°,**0 four positions, no operation in the middle, short measurement time, high efficiency and small labor intensity.

High precision series: 
adopt electronic balance, have higher measurement
precision, range below **0 kg can adopt high precision series, radial centroid measurement error is less than 0.*2 mm, longitudinal centroid measurement error is less than 0.*5 mm.