Precio FOB
Obtener el precio más reciente4 USD / Kilogram ( Negotiable )
|200 Kilogram Minimum Order
País:
China
N º de Modelo:
JP017
Precio FOB:
4 USD / Kilogram ( Negotiable ) Obtener el precio más reciente
Lugar de origen:
China
Precio de pedido mínimo:
4 per Kilogram
Cantidad de pedido mínimo:
200 Kilogram
Detalle de embalaje:
Carton
El tiempo de entrega:
25 Days
Capacidad de suministro:
100 Ton per Month
Tipo de pago:
L/C, T/T
Grupo de productos :
Persona de contacto Cherry Zhou
No.12 Fengjing Industrial Park,Xi'An Economic And Technological Development Zone, Xian, Shaanxi
Pharmaceutical Blister Packaging Of Aluminum Foil
1. Introduction
Customized: yes
Material:PTP
Thickness:0.020mm(before coating). medition plastic large colored aluminum foil rolls
Width: 50mm-1000mm(according to your requirement)
Core Inner diameter:76mm
One side coated OP for heat sealing with PVC/PVDC for packing tablet,capsules,etc. The other side is printed or coated primer for printing embossed industrial aluminum foil insulation roll
2. Structure: Pharmaceutical Blister Packaging Of Aluminum Foil
HSL/Alu
foil/Printing layer/OP layer
HSL/Printing
Printing Quality layer/Alu foil/Printing layer/OP
layer
HSL/Printing
layer/Alu foil/OP layer
HSL/Alu foil/OP
layer
HSL/Alu
foil/Primer(printable)
3. Technical Data: Pharmaceutical Blister Packaging OfAluminum Foil
|
Clear;smooth;uniform coating,no more than 3 joint-points each 1000m,marked each joint-point,surface&side entangles tightly and neat. Tower-shaped, staggered &core falling free & severe damage are forbidden.
|
|
| Width Deviation | ±0.5mm |
| Thickness Deviation | ±0.003mm |
| Pinhole |
There are no dense, continual ,periodic pinhole. There
are no pinhole with d≥0.3mm in 1m2. |
| Printing Quality |
The letter and design is
correct,clear,fastness, non-fade in high-temperature heat
seal process. |
| Protecting Layer | Non-desquamation by adhesive tape test |
|
Difference of Coated Volume of Adhesive Layer |
≤±10% |
| Heat seal Strength of Adhesive Layer (N/15mm) | ≥7 |
| Rupture Strength(KPa) | ≥98 |
| Performance of Opening the Roll | Protecting layer& Adhesive layer are not agglutinate |
| País: | China |
| N º de Modelo: | JP017 |
| Precio FOB: | 4 / Kilogram ( Negotiable ) Obtener el precio más reciente |
| Lugar de origen: | China |
| Precio de pedido mínimo: | 4 per Kilogram |
| Cantidad de pedido mínimo: | 200 Kilogram |
| Detalle de embalaje: | Carton |
| El tiempo de entrega: | 25 Days |
| Capacidad de suministro: | 100 Ton per Month |
| Tipo de pago: | L/C, T/T |
| Grupo de productos : | Aluminum Foil |
