JC**0 DTH Drilling Machine
JC**0 hydraulic down-hole rock drill is a multi-functional
drill rig driven by internal combustion engine, the drilling
power was provided by hydraulic system except for impacting and
the hole cleaning wind.This mobile drilling rig is convenient
and efficient to operate. This drill rig is the best
replacement for traditional pneumatic drills in most operation.
The drilling rig is compact in structure, simple in
operation,light in total weight. JC**0 hydraulic crawler
drilling rig is widely used for blast-hole drilling in the
mines and quarries.JC**0 rock blasting drilling machine is also
used for anchor in road, railway, power station, civil
engineering and building etc.
Characteristics
1: The Rugged track was driven by hydraulic motor with high
traveling ability.
2: The feed and rotary head were driven by hydraulic motor,
therefore, the air and oil consumption and total drilling cost
are lower.
3: The hydraulic feed and rotary head put out the biggest
feeding force and largest rotary torque, which makes it more
suitable for operation in complex worksites.
4: The compressor equipped for the rig is smaller and cheaper
than that one the air rig equipped, along with the best
price-performance ratio than air rig.
5: The Hydraulic track oscillation makes it more suitable to
drill in any rough terrain.
6: The carriage with rollers provides for minimal wear to the
drill guide.
7: The Hydraulic auxiliary functions are easy and efficient for
guide extension, boom swing, boom lift, guide tilt and guide
dump.
8: The diesel engine and main hydraulic parts adopt imported
products or famous domestic brand.
9: The special compensation device makes a full protection of
drill rod threads.
Specification
1 Rock Hardness F=***0
2 Hole Diameter mm *****5
3 Hole Depth m *0
4 Drilling Rod Diameter mm *0,*6,*9
5 Rotation Torque Nm ***0
6 Rotation Speed rpm ****0
7 Max. Feed force KN *0
8 Max. Lifting force KN *0
9 Max. Feed Speed M/min *5
*0 Max. Lifting Speed M/min *5
*1 Max Swing of Boom ° *5° left / *5° right
*2 Max Dump of Boom ° up*0 down*0
*3 Max Swing of Guide ° *0(L) / *1(R)
*4 Max Dump of Guide ° **0
*5 Guide Extension mm ***0
*5 Feed Stroke m 3
*6 Manufacturer CUMMINS
*7 Electrical System *4 Volt
*8 Compressor Pressure Required M³/min Φ≤**5 *1.3m2/min(1.4
Mpa)
Φ≤**0 *3m2/min(1.4 Mpa)
Φ≤**5 *7m2/min(1.4 Mpa)
Φ≤**5 *1m2/min(2.4 Mpa)
*9 Max. Travel Speed Km/h 2
*0 Gradeability ° *4
*1 Net Weight kg ***0
*2 Shipping Length mm ***0
*3 Shipping Width mm ***0
*4 Shipping Height mm ***0
