Precio FOB
Obtener el precio más reciente650 ~ 1200 / Set ( Negotiable )
|1 Set Minimum Order
País:
China
N º de Modelo:
RS-I
Precio FOB:
650 ~ 1200 / Set ( Negotiable ) Obtener el precio más reciente
Lugar de origen:
China
Precio de pedido mínimo:
650 per Set
Cantidad de pedido mínimo:
1 Set
Detalle de embalaje:
box
El tiempo de entrega:
5 to 10 days
Capacidad de suministro:
-
Tipo de pago:
PayPal, Western Union, T/T
Grupo de productos :
Persona de contacto Nick
Ningbo, Zhejiang
Internal spring controlled shut-off nozzle mainly serves to solve the leakage of low density thermoplastic injection process, like PA, PP, PS, PE, which can improve production efficiency and save production cost, and its used lot in low-frequency injection process.
MechanismThe needle is drove by internal spring and keep shutting automatically, during injection process, the increased pressure force the needle back to open the channel and ensure proper injection, after injection ends, pressure drops and needle will again lockup by spring and prevent material from leaking out of nozzle.
ApplianceAuto parts, Electronic components, Package & Housewares
Assembling & Cleaning
The assembling of spring shut off nozzle is very easy and same as
standard open nozzle, no require of additional knowledge or
equipment, can directly change your current nozzle. Just make sure
the assembling space is enough.
In case of cleaning situation, simply disassemble the front nozzle
and spring house, remove the plastic by proper tools, if its tight,
remove the front nozzle, start injection process, and it will be
pushed out by melt pressure.
The opening & shutting of spring nozzle is totally decided by melted polymer pressure and not adjustable, which is not quite suitable for some high-speed injection or need precise synchronous control situation.
MAIN PARAMETER| Max. Injection Rate | : ***0 cm3/sec |
| Actuator | : Internal Spring |
| Open Pressure | : **0 Bar (Ref.) |
| Close Pressure | : *0 Bar (Ref.) |
| Max. Injection Pressure | : ***0 Bar |
| Max. Temperature | : **0 ℃ |
| PARAMETER | RS-I | RS-II | RS-III | |
| Max. Injection Rate (PS) | cm3/sec | **0 | **0 | ***0 |
| Max. Screw Size (Ref.) | mm | *0 | *0 | **0 |
| Nozzle Body Length (L1) | mm | *4 | **0 | **5 |
| Tip Length (L2) | mm | *7/*7 | *7/*7 | *6/*6 |
| Heater Size (G) | mm | Φ*5**0 | Φ*5**0 | Φ*0**0 |
| País: | China |
| N º de Modelo: | RS-I |
| Precio FOB: | 650 ~ 1200 / Set ( Negotiable ) Obtener el precio más reciente |
| Lugar de origen: | China |
| Precio de pedido mínimo: | 650 per Set |
| Cantidad de pedido mínimo: | 1 Set |
| Detalle de embalaje: | box |
| El tiempo de entrega: | 5 to 10 days |
| Capacidad de suministro: | - |
| Tipo de pago: | PayPal, Western Union, T/T |
| Grupo de productos : | Nozzle and Tips |
