Injection molding grade Udel P-1700 polysulfone (PSU )resin for Automotive Electronics

Descripción del producto

Solvay Udel

Injection Molding grade Solvay Udel P-1700 polysulfone (PSU )resin for Automotive Electronics

Udel® PSU (polysulfone) is a rigid, high-strength, semi-tough, transparent plastic that offers higher heat resistance and better hydrolytic stability than polycarbonate. It retains its good mechanical properties when exposed to steam and other sterilization techniques.



Udel® PSU excels in many fluid-handling applications and has successfully replaced brass in pressurized hot water applications for over 20 years. It exhibits low creep under a sustained load at elevated temperatures and can withstand continuous exposure to hot chlorinated water.

Udel P-1700 

Polysulfone

Udel P-1700 polysulfone ( PSU) is a tough , rigid , high -strength thermoplastics suitable for continues use up to 149 ℃. It is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization . Udel P-1700 polysulfone is highly resistant to mineral acids , alkali and salt solutions.  Resistance to detergents and hydrocarbon oils is good, but the resin may be attached by polar solvents such as Ketones , chlorinated hydrocarbons and aromatic hydrocarbons . 

• Transparent : Udel P-1700 CL 2611 CMP
• Transparent : Udel P-1700 NT 06
• Transparent : Udel P-1700 NT 11
• Opaque Black : Udel P-1700 BK 937
• Opaque White : Udel P-1700 WH 6417
• Opaque White : Udel P-1700 WH 7407

Technical Data sheet of  PSU resin Udel P-1700

Solvay PSU Udel Main Model No. :

Solvay UDEL P-1700 NT11

Solvay UDEL P-1710

Solvay UDEL GF-110

Solvay UDEL GF-120

Solvay UDEL GF-130

Solvay UDEL P-1700 LCD

Solvay UDEL P-1750 MR

Solvay UDEL P-3500 LCD MB

Solvay UDEL P-3500 LCD

Solvay UDEL P-3700 HC

Solvay UDEL P-3703



Packaging Detailsof PSU resin Udel P-1700 : 25 kgs per bag. 

                               Length 600 mm, Width 400 mm, Height 200 mm. Weight 25.25 kgs.

Certificates