In Stock Disposable Medical Face Mask Non Woven Face Mask 3Ply I II IIR Type EN14683 With CE Certificate INTRAG Respirator

Descripción del producto

Medical face mask materials covered under these specifications shall be designated as one or more
of the following performance classes based on the barrier performance properties of the materials
used in medical face masks:
 
A. Fluid resistance:
1. Fluid resistance is the masks resistance to penetration by synthetic blood under pressure(mmHg).
2.Fluid resistance measures the ability of a face masks material construction to minimize fluids from traveling through the material and potentially coming into contact with the clincian.
3. The higher the fluid resistance,The better the protection from exposure to blood and splash/spray/spatter.
4.When masks become saturated with fluids from both the inside and outside,the transfer of substances through the mask (also called wicking)is enhanced.
B. PFE Sub-Micron Particulate Filtration Efficiency:
1.PFE is the percentage of particles filtered out at a spore size of 0.**1.0 microns.
2.PFE is the measure of the efficiency of the mask filtering of particles passing through the mask.
3.It is critical to note the size of the particles filtered.
 
C.BFE Bacterial Filtration Efficiency:
1.BFE is the percentage of bacteria filtered out at a spore size of **5 microns.
2.BFE is the measure of the efficiency of the mask filtering of bacteria passing through the mask.
D.Delta P Differential Pressure:
1.Delta P represents the pressure drop across the mask of resistance to air flow in mmH2O / ㎡ .
2.Delta P determines breathing resistance.
3.The higher the Delta P ,the less the breathablilty,but the better the filtration.
E.Flammability:
Flammability measures flame spresd of the mask material