Descripción del producto

Technical specifications
1.Working Condition

>Working temperature: ****0℃

>Relative humidity: ≤*0%

>Power supply: AC **0±5V (Remarks: the power supply also can be **0±5V)
2.Solid state generator:

Free running Solid state RF generator Frequency: *7.*2MHz

Frequency Stability: ≤0.*5%

Power Output: **0 W ~***0 W

Power Output Stability: ≤0.1%

Power requirement: **0V, *0A

Automatic ignition and extinguish of the Plasma. Instrument gets ready within *5 minutes from standby mode. The RF generator is fully interlocked for safety and convenience. 
3.Torch and sampling system:

>Fully demountable Torch with easy operation

>Radical view of Plasma. Auto aligns of the torch position by software.  

>Introduction Coils: *-turn/**-mm ID, *-concentric quartz torches/**-mm OD.

>Concentric nebulizer diameter: *-mm OD; Dual Cylinder type Spray Chamber: **-mm OD

>Peristaltic pump: 4 channels. Auto Fast pump facility

>Gas Flow controls(On-line monitor and control of the gas flow by software):

Plasma Argon Flow meter: (*0~***0) L/h or (1~*0)L/min

Auxiliary Argon Flow meter: (3~*0) L/h or (0.*5~1.0) L/min

Carrier Argon Flow meter:(3~*0)L/h or (0.*5~1.0) L/min

>Cooling Water:

Temperature range *0℃~*5℃, flow>7 L/min, pressure>0.1 MPa, resistivity>1 MΩ
4.Optics and detector(PMT):

>Echelle based simultaneous spectrometer( measurement speed: *3 elements per minute)

>Resolution: 0.**7nm at **0nm

>Wavelength range: ******0nm

>Grating : *2.*7 lp/mm

>Detector:

CID(Charge Injection Detector)

Megapixels, *7.6mm×*7.6mm ultra large format

>Echelle polychromator focal length: **0mm

>Flow control gas purge for the optical system.

>Constant temperature control for optical system. 

5.Computer (Optional and charged additionally)

1.1 Configuration: OS Windows 7 or Up

1.2 Memory: 2G or better

1.3 Monitor: *7 SVGA LCD

1.4 HD: **0G or more

1.5 DVD-ROM: *4X or more

1.6 CPU: Inter Core i3 or above

1.7 USB Port: 4 or more

6.Software

The system is supplied complete with ICP ***0T software, which is compatible with Windows XP and Windows 7 operating systems. Multi task windows design for the maximum amount of flexibility combined with easy of setup and routine operation.

The standard and trace calibration modes allow the analysis of both simple and complicated sample matrix. Trace mode can also avoid the potential spectral interferences.

7.Accessories:

>Water chiller (water purifier included): 1 set

>Argon gas regulator: 2 pieces

>Power stabilizer: 1 set

>Quartz Torch: 2 pieces

>Concentric nebulizer: 1 piece

>Spray chamber: 2 pieces

>Peristaltic pump: 1 set

>Sampling tube. Peristaltic pump tube. Drain tube

>Clamp, torch ball joint connector: 1 set

>Cover of the instrument: 1 piece

Local Accessories

>Element standard solution.

>ICP hood and vent system

>Argon gas cylinder(2 bottles at least)

>ICP table

>Sample preparation Kit

8.Necessary Technical Documents Enclosed:

>Operation Manual

>Software and Data CD

>A List of the Parts

>Inspection Report

>CE certificate