Descripción del producto

Very-low frequency High Voltage Test Set

Description:

• For those bigger capacitance specimens, such as *5KV XLPE power cable, Generators, Power Capacitors, their HV dielectric strength test at main power frequency, Very Low Frequency is an idea substitute.
• Compared with Hipot test set at main power frequency, VLF HV Test Set need much small test power capacity. About 1/**0 in theory. Its size and weight also is decreased greatly.
• Based on electronic frequency conversion and microprocessor controlled technology, Model VLF*0KV /1.1uf has excellent performance.
• For VLF*0KV/1.1uF,it is prohibited to boost voltage without load, or to connect with resistive load.  

Product Features:

• Electronic frequency conversion        
• Microprocessor Controlled
• Portable design, Large LCD display
• Sine Wave Output
• Overvoltage protection, action time is less than*0ms
• Over current protection for both and output side, action time is less than*0ms
• Output current/Voltage\wave form is sampled at high voltage side directly
• HV Current Limiting Resistor inside
• Micro-printer inside
• Output voltage will not be affected by capacitive current during test since closed-loop negative feedback design  

Technical Specifications:

• Output: sine wave form,0~ *0KV(peak value), continuously adjustable, output by shielded cable
• Output frequency: 0.1Hz, 0.*5Hz, 0.*2Hz 
• Load range: 0.1Hz, ≤1.1μF ; 0.*5HZ,≤2.2μF ;0.*2HZ ≤5.5μF;
• Input:**0V±5%,*0HZ
• Measurement accuracy: 1% 
• Positive and negative voltage peak errors: ≤ 3% 
• Voltage wave form distortion: ≤ 5% 
• Power supply fuse tube:5A 
•  Time range:***9min
• operation condition: Indoor and outdoor; 
• Temperature: **0C*-**0C;
• Humidity: ≤ *5%RH 7. Power supply: AC*0Hz, **0V ±5%
• Controller:**6mm×**0mm×**0mm, 4kg
•  High voltage booster:**0mm×**8mm×**0mm,25kg

 Order Information

Item                   Art. No.

Controller                        1 piece

High voltage  Booster      1 piece

Optional for Order

• If the specimen capacitance is less than 0.*5uF, VLF*0KV/1.1 uF output waveform will be bad. For better performance, optional capacitor is necessary.