Descripción del producto
High Voltage
Detector
Model:
***5KB
This Model 9 **5KB detects the
presence of voltage in AC lines. An elongate insulation rod permits
checking of high tension circuits at safe distance for voltage. The
equipment is compact, light weight, and easy to handle,and is also
available for voltage detection in low-tension circuits.
Features
• Telescopic, compact, light-weight
The length is elastic from **0mm to **0mm,The Equipment is
light-weight (**0g), easy to handle, and handy to carry.
• Non-contact high-voltage detection
The equipment, whether in stretched state is
available for voltage detection in high-tension circuits(1.0kV ~
*5kV) whether the wires involved are naked or insulated.
• Low-voltage detectable
The equipment can be used for voltage detection in
low-tension circuits (*0V ~ 1.0kV) by holding the nameplate
portion of the detecting head. Before-use check can easily be
done by plugging in an AC **0V plug socket,without using a
tester.
• Easy to recognize indication
Intermittent lighting in red of a high intensity
lightemitting diode and intermittent audible sound of an
electronic buzzer are readily recognizable at a full daylight,
noisy location.
• Waterproof
The detecting head, being tightly enclosed, is free
from any trouble due to dust, dirt, water or the like.
• Dielectric Strength :
(a)Between
Sensing tip ~ Grip portion : *0kV AC, 1 min (The detector has to
be stretched)
(b)Between Sensing tip ~ Nameplate portion : 4kV
AC,1min.
• Construction :
Waterproof (detecting head impervious to water).
• Insulation resistance :
Measure the insulation resistance with the high
voltage insulation tester.
The areas we measure are the same as Dielectric
• strength test.
(a)Between Sensing tip ~ Grip portion : 1kV (The
detector has to be stretched) The insulation resistance has to be
more than ***0 MΩ
(b) Between Sensing tip ~ Nameplate portion : 1kV
The insulation resistance has to be more than ***0 MΩ
• Leakage Current Test :
Put high voltage on the parts listed below.
(a) Between Sensing tip ~ Grip portion : *0kV AC, 1
min (The detector has to be stretched) The leakage current
has to be **0 uA or less than **0 uA
(b) Between Sensing tip~Nameplate portion : 4kV
AC,1min. The leakage current has to be **0 uA or less than **0
uA.
• Working temperature range : **0°C ~ **0°C
• Battery : 2 -cells LR*4(1.5V)
• Meets EN ******1 / EN ******1 / EN ******1 / EN ****2 / EN
********2 / EN ********3
Ratings And
Specifications
• Working voltage range :
H.V. : 3kV~*5kV AC..... hold grip portion to
detect.
M.V. : 1kV~3kV AC..... hold grip portion to
detect.
L.V. : *0V~1KV AC..... hold nameplate portion to
detect.
• Frequency : *0Hz / *0Hz
• Operation Test : ( Initial voltage )
(a)When stretched, hold the grip portion.Put the
sensing tip in contact with the voltage : **0V AC ±0V the LED and
buzzer should work.
(b)When retracted, hold the nameplate portion.Put
the sensing tip in contact with the voltage :*0VAC or below the
LED and buzzer should work.
• Operation start distance
Distance at which operation starts when front metal
is brought near Ø5mm O.C. wire with grip portion meld by
hand.
Where *5kV / Ø3mm(voltage to ground) ......abt
*0cm.
Where 6.0kV / Ø3mm (voltage to ground) ......abt
3cm.
Where 3.0kV / Ø3mm (voltage to ground) ......abt
1cm.
Scope of Supply
1 pc ***5KB
3 pc -cells
LR*4(1.5V)
1 pc Leather goods
package
1 pc Metal hook
1 pc Instruction Manual
| País: |
China |
| N º de Modelo: |
9035KB
|
| Precio FOB: |
( Negotiable ) (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
- |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
1 Set |
| Detalle de embalaje: |
carton |
| El tiempo de entrega: |
in stock |
| Capacidad de suministro: |
- |
| Tipo de pago: |
T/T |
| Grupo de productos : |
- |
