Descripción del producto
PSA zeolite Molecular Seive Oxygen Generator
Our company specialize in
making various kinds of compressors, such as:Diaphragm
compressor,Piston compressor, Air compressors,Nitrogen
generator,Oxygen generator ,Gas cylinder,etc. All products can be
customized according to your parameters and other
requirements.
Working
principle
After being compressed by an air
compressor, the raw air enters the air storage tank after dust
removal, oil removal and drying, and then enters the A adsorption
tower through the A intake valve. At this time, the tower
pressure rises, the nitrogen molecules in the compressed air are
adsorbed by the zeolite molecular sieve, and the unadsorbed
oxygen passes through the adsorption bed and enters the oxygen
buffer tank through the outlet valve. This process is called
adsorption. After the adsorption process is over, the adsorption
tower A and the adsorption tower B are connected through a
pressure equalizing valve to balance the pressure of the two
towers. This process is called equalizing pressure. After the
pressure equalization is over, the compressed air passes through
the B intake valve and enters the B adsorption tower, and the
above adsorption process is repeated. At the same time, the
oxygen adsorbed by the molecular sieve in the adsorption tower A
is decompressed and released into the atmosphere through the
exhaust valve A. This process is called desorption, and the
saturated molecular sieve is adsorbed and regenerated. Similarly,
the right tower is also desorbed when tower A is adsorbing. After
the adsorption of Tower B is completed, it will also enter the
pressure equalization process, and then switch to the adsorption
of Tower A, so that the cycle alternates and continuously
produces oxygen. The above-mentioned basic process steps are all
automatically controlled by PLC and automatic switching
valve.
Technical
characteristics
1. Equipped with air pretreatment equipment such as refrigeration
dryer, which effectively guarantees the service life of molecular
sieve.
2. Using high-quality pneumatic valve, short opening and closing
time, no leakage, service life of more than 3 million times,
meeting the requirements of frequent use of pressure swing
adsorption process, and high reliability.
3. Using PLC control, it can realize fully automatic operation,
convenient maintenance, stable performance and low failure
rate.
4. The gas production and purity can be adjusted within an
appropriate range.
5. Continuously optimized process design, combined with the
selection of new molecular sieves, minimizes energy consumption
and capital investment.
6. The device is assembled in a complete set to reduce on-site
installation time and ensure quick and easy on-site
installation.
7. Compact structure design, less floor space.
How to get quote
:
1.Flow : _________Nm3/h
2.Inlet pressure : _____Bar
3.Exit Pressure :____Bar
4.Gas Medium :____
5.Voltage and Frequency : ________V/PH/HZ
| País: |
China |
| N º de Modelo: |
-
|
| Precio FOB: |
10000 ~ 100000 / Set ( Negotiable ) (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
China |
| Precio de pedido mínimo: |
10000 per Set |
| Cantidad de pedido mínimo: |
1 Set |
| Detalle de embalaje: |
Wooden Box |
| El tiempo de entrega: |
30 to 50 days |
| Capacidad de suministro: |
500 Set per Year |
| Tipo de pago: |
T/T, L/C |
| Grupo de productos : |
Oxygen generator
|
