Precio FOB
Obtener el precio más reciente3 / Kilogram
|100 Roll Minimum Order
País:
China
N º de Modelo:
Pipe wrap
Precio FOB:
3 / Kilogram Obtener el precio más reciente
Lugar de origen:
-
Precio de pedido mínimo:
3 per Kilogram
Cantidad de pedido mínimo:
100 Roll
Detalle de embalaje:
400*400*420
El tiempo de entrega:
4 days
Capacidad de suministro:
300 Ton per Month
Tipo de pago:
T/T, L/C
Grupo de productos :
Persona de contacto Mr. Spark
Chenguang Road, No. 1, Rencheng Industry District, Jining, Shandong
heat shrinkable sleeve for pipe anticorrosion
1 System description:
The XUNDA-T 800 is a hand wrapped heat shrinkable tape designed for corrosion protection of straight pipes,
fittings,
bends, elbows and other irregular configurations.. When heated the backing layer shrinks and the
adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.
The Polyethylene Heat shrinkable Tape needs no primer nor patch closure and reduces application time and labour costs.
2 Structure
The specification of the tape consists of three layers,
Adhesive: butyl rubber based hot melt adhesive
Film backing: polyethylene
Interleaf:Antiadhesive Film Treated with Silicone
3 Features
After heating, formed corrosion protection seal
Strong backing provides outstanding waterproofing effect
High chemical resistance. resists impact, abrasion and ultraviolet light.
Excellent resistance against cathodic disbondment, dielectric breakdown.
Simple Application
4 Physical Properties
· Product Data Sheet Total Thickness:40mil, 50 mil,60 mil ,65 mils.
· Width:50,100,150,300,400,500,800 mm
· Length: 10 m
· Tensile Strength:35 N/cm
· Elongation:400%
· Adhesion Strength to pipe:30 N/cm
· Application temperature: -10 -60 °C
· Temperature resistance:-50 °C - 80°C
· Shelf Life: 12 months
5 Application
No Special skills, equipments, patch closure nor primer are needed. Its superior flexibility provides easy and reliable application for irregular configurations of fittings, bends and elbows and small diameter of straight pipes.
Wrap spirally the tape over foreign matters-free and preheated surface, beginning at least 25~50mm (1~2 ) onto pipe coating. Wrap the tape with enough tension to obtain conformability and with minimum 50% of overlapping, while removing the release liner. Warm the end part of the tape and press down firmly. Using a torch, start at the edge of the tape and heat circumferentially around the coated pipe.
Finish off by heating over the entire tape vertically to ensure a uniform adhesion and by using a roller or gloved hands to remove wrinkle and air.
Contact:Nancy Song
QQ:2934034518
Skype:nancysong7
008613791713064008613791713064(whatsapp)
País: | China |
N º de Modelo: | Pipe wrap |
Precio FOB: | 3 / Kilogram Obtener el precio más reciente |
Lugar de origen: | - |
Precio de pedido mínimo: | 3 per Kilogram |
Cantidad de pedido mínimo: | 100 Roll |
Detalle de embalaje: | 400*400*420 |
El tiempo de entrega: | 4 days |
Capacidad de suministro: | 300 Ton per Month |
Tipo de pago: | T/T, L/C |
Grupo de productos : | Anticorrosion |