HDMI Matrix Switchers

Descripción del producto

Features : 
  Four HDMI signals to be independently distributed or switched to four displays which support HDMI signal
Support HDMI 1.3 and HDCP1.4
Support true color *2 bit
Support Blu-Ray DVD*4/*0/*0fs/HD-DVD/xvYCC
Support audio format DTS-HD/Dolby-trueHD/LPCM7.1/DTS/DOLBY-AC3/DSD
Support signal timing reset
Support AWG*6 HDMI standard cable, up to *0 meters,output up to *0 meters
Input ports can be controlled by IR Remote Control Via RS***2 control, you can upgrade the software of the machine, the and the output can be switched by computer
No signal loss
*2V/3A Power Supply
 Physical interface diagram
INPUT*-INPUT 4:HDMI
OUTPUT*-OUTPUT4: HDMI output
ON/OFF: Power switch
DIP:dial switch to switch software for upgrading
IR: used for the IR remote control of this machine
DC *2V:DC*2V/3A power supply

Serial IR: matched with infrared receiver, it is used for control the machine
RS**2:control the machine via the serial port
Output1: the key of HDMI output 1
Output2: the key of HDMI output 2
Output3: the key of HDMI output 3
Output4: the key of HDMI output 4
IR: used for the IR remote control of this machine
L*-L4: Input signal Indicator L****-L4
RS***2 settings:
 
Baud rate...….......................................................................................................***0
 
Data bits................................................................................................................... 8
 
Parity Check .............................................................................................................None
 
Stop bits....................................................................................................................1
 
Cyclic redundancy check..............................….......…None
 HDMI 4X4 serial port instruction manual
 
 
1.video switch
Cir +" " cmd +Enter
Cmd value range: >=0 and 4
 
3)all output++switch:cir aa+Enter
 
For example:
cir aa+Enter:indicate output1~ouput4  the selected make an addition switch
 
4)all output - -switch:cir ab+Enter
 
For example:
cir ab+Enter:indicate output1~ouput4 selected make an subtraction switch
 
5)single output- -switch:cir xc+Enter
"x"value range 0~3,
 
For example:
cir 1c+Enter:indicate output2 selected make an addition switch
 
6)single output++switch:cir xd+Enter
"x"value range0~3,
 
For example:
cir ,1d+Enter:indicate output2 selected make an subtraction switch
 
7)Any output switch to any :cir xy+Enter
"X" value range 0~3,"y" value range 0~3
For example:
Cir *3+Enter: indicate output1 switch to 4
Cir *2+Enter: indicate output2 switch to 3
 
 
EDID switch
This machine provide EDID include:
1)***0I 2ch 2d
2)***0I 6ch 2d
3)***0I 8ch 2d
4)***0P 2ch 2d
5)***0P 6ch 2d
6)***0P 8ch 2d
7)***0P 2ch 3d
8)***0P 6ch 3d
9)***0P 8ch 3d
*0)***0X***4  DVI
*1)***0P DVI
*2)***0X***0 DVI
 
Serial port instruction:
 
sid+" "x1+" "x2+Enter
 
x1 indicate the port ,value range 1~f,1~4 indicate 1~4,"f"indicate all
x2 indicate the selected EDID,value range 1~c, corresponding EDID are above listed1~*2 EDID.
 
For example:
 
sid 2 a+Enter
Indicate 2 select ***0X***4  DVI EDID
 
 
 
Specification:                                  
HDMI resolution................*4/*0/*0fs/***0p/***0i/**0p/**6p/**6i/**0p/**0i
Support audio color format ........................ …............................*2bit
Support audio format......…DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max baud rate..........….......................... .....2.*5Gbps
Input and output TMDS signal........................... 0.5~1.5Volts p-p
Input and output DDC signal........................…..5Volts p-p (TTL)
Input cable distance.............…..................≤*0m HDMI AWG*6
Output cable distance...............….…...≤*0m AWG*6 HDMI standard cable
Max working current.......................................…1.3A
Power adapter format Input...…:AC(*0HZ, *0HZ) **0V***0V;output: DC*2V/3A
Operating Temperature range...........…................… (**5 to **5ºC)
Working humidity range................…....…5 to *0%RH (No Condensation)
Dimension (L x W x H)...............................**5***4**6 (mm)
Weight…................................…........…....…..***0g
 Operating and Connecting:
 
1 Connect HDMI cable from HDMI source device into HDMI matrix port
2 Connect HDMI cable from HDMI matrix Output port into display
3 Connect *2V External power adapter to the HDMI matrix
4 The customer can switch the signal to corresponding output port via the on front panel.
5 How to use RS***2 port?
Through RS - **2 port you can update software and monitor the state of the and output signals. And it can switch signals via RS**2. When connect to the computer, the customer can easily switch the signals via computer.
 
 
The Package includes:
 
1. HDMI Matrix           x1pc
 
2. IR Remote Control      x1pc
 
3. *2V DC Power adapter  x1pc
 
4. User Manual.           x1pc
 
 
Notes:
Please use correctly and maintenance properly, to ensure product performance and work properly
Should Stay away from damp, high temperature, dusty, corrosion and oxidation gas environment in order to avoid damage
All parts should avoid strong vibration, no collision tapping and drop fall, to avoid damage.
Do not touch the unit power adapter plugs with wet hand
Unplug the adapter plug from the power socket, please hold the plug, don't pull the
power cord
 please turn off the power supply when not use the machine.(unplug the power adapter plug when not use for a long time)
Please do not open the machine cover, do not touch any device in the machine.
Please use the power adapter provided or approved by the manufacturer
 
Pls Check the connecting cable carefully before the power on, Must ensure all interface are right connected.Common fault diagnosis and processing method is as follows: