Guangdong GWX-003 high quality polycarbonate sheet plastic sheet

Descripción del producto

Features  

1. Light transmission:

 Fine light transmitting rate approve to *0— *5%.

 2.Weather resistance:

 With anti-UV inhibition on the surface, it can prevent the resin from fatigue and yellowing caused by UV. The anti-UV agent on the surface can change the UV absorbed by chemical bond into visible light, and finely stabilize the photosynthesis of plants.
3.Impact resistance:

With the strength **0 times than the ordinary glass, *0 times than the PMMA sheet, it has less risk of breakage
4.Fire retardant:

Fire retardant is up to B2 level (based on National GB******8 testing, without flame or toxic gas).
5.Temperature toleration:

Without deformation within the temperature range from**0°C to ***0°C.
6.Sound insulation:

It is the best transparent materials for sound insulation engineering as expressways, factories, etc.
7.Portability:

Easy for handling and drilling, won't be breakage when cutting, simple and easy be treated in using.

 Technical data

  Applications   

 1) roofingfor swimming pool, shopping malls, commercial streets
2) Sunshadefor stadiums and bus stops, gazebo, open air carport
2) lighting canopy for corridors, passages and subway entries
3) ATM machine covers, telephone booth, gateways, garages
4) Sound and heat insulation wallfor expressways and houses
5) Instead of glass, decoration door, curtain wall
6) Soundproof material for partitions
7) Unbreakable materialfor glazing widows, roof glazing.
8) Lightingof modern villa, rain-proof lighting shed of underground garage entryway
9) Front wind shieldsof motorcycles, airplanes, trains, liners, vehicles, motorboats, submarines and riot shield.

Installation instructions

1.PC sheet do not contact the surface of cement walls.

2.Clean the frame so as to keep smooth of notch.

3.Use the appropriate sheet thickness which allow enough curvature radius.

4.Allow enough space for the expansion of panel. At least *0 mm distance between screw hole and the panel's edge.

5.Use the neutral silicone,don't use PVC stripes.

6.Use the dynamoelectric cutting tool,(Tungsten carbide blade). please make sure the panel is stable to avoid its shaking.Forbid tear away the film on the surface before cutting

CLEANING & MAINTENANCE

According to correct procedure, suitable cleanser and tools are used to clean the sheets regularly. It could keep the sheets graceful and extend the sheets’ useful life:

 1. Rinse sheet with lukewarm water (under *0°C)

 2. Please choose cleanly and soft cloth or sponge with neutral liquid soap or detergent to clean the dirt on the surface lightly

 3. Rinse sheet once again

 4. The soft cloth with anhydrous alcohol could be used for cleaning, if oil, wet paint, glue spotting and other things are on the sheet..

 5. Rinse with cold water and dry with a soft cloth to prevent water spotting after cleaning.

 Recommendation of using solvent for cleaning

 Absolute alcohol, Petroleum ether, Hexane

 NOTICE

  Steel wool, brushes and other crude material are not allowed to contact with the PC sheet. 

 Do not use drawknife, razor and other edgy tools to scratch PC hollow sheet.