Descripción del producto
GT***0 is a compact board that is
integrated with the mighty function of the Arduino
Mega***0+Ultimaker. The GT***0 can not only take full place the
Arduino Mega***0+Ultimaker on respect of both software and
hardware, but has more premium features: the streamlined interfaces
effectively avoid the unnecessary troubles, well-regulated
compaction of components highly integrated saves more space and
easier to be mounted on most applications.
5 stepper motors, swappable driving modules, mighty ATmega***0
processor with **6k memory, *6MHz operating frequency,
high-performance USB serial converter FT**2RQ, all these make the
GT***0 an ideal option for a 3D printer control board. Whats more,
GT***0 can run over *2V and output *0W to a MOSFET, which gives
higher torque and higher rotation rate.
Features：
1.Integrated with the mighty function of the Arduino
Mega***0+Ultimaker, The GT***0 can not only take full place the
Arduino Mega***0+Ultimaker on respect of both software and
hardware, but also features compact size, more convenient
connection, and more stable.
2. Adopt ATmega***0 as the main control chip, coupled with the
high-performance USB serial converter FT**2RQ.
3. The power pack: operating voltage is *2V**4V; double power
supply design feeds for heatbed and logical part separately. The
current is *2A for heatbed and 5A for other parts. The cooling fan
can support *2V
4. The main circuit adopts SMD fuse tube, the diode added to the
power port can provide reverse protection to the whole circuit, in
addition, the 5V USB is USB port protected with **0mA Recoverable
fuse.
5． 3 *2v fan output and one PWM output for LED or other lighting
equipment.
6. 3 *5Amp MOSFET (with LED indicator, the actual output is
restricted by the PCB board and the connector), all 3 MOSFET are
equipped with heat sink to ensure sufficient heat dissipation and
stable operation.
7. Support 5 A***8 stepper drivers (3 for X/Y/Z axis, and 2 for
extruders); the subdivision of stepper motor can be setup by dial
switch, eliminating jumper caps, easier to operate.
8. 3 temperature sensor (**0k thermistor is recommended)
9. Extended LCD and SD card interface support both LCD***4 and LCD
****4, with which you can print without your PC.
*0. The firmware is the prevalent Marlin, which is known for
stability, usability, and high-performance.
| País: |
China |
| N º de Modelo: |
GT-CB-01
|
| Precio FOB: |
35 ~ 40 / Piece (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
- |
| Precio de pedido mínimo: |
35 per Piece |
| Cantidad de pedido mínimo: |
1 Piece |
| Detalle de embalaje: |
box or bags |
| El tiempo de entrega: |
5-10days |
| Capacidad de suministro: |
200 Piece per Month |
| Tipo de pago: |
PayPal, T/T |
| Grupo de productos : |
3D controller board
|
