Descripción del producto

Product Description



This is the Great Planes 1.****0cc Reactor ARF Airplane. This airplane is ideal for a flyer's first giant scale aerobatic and 3D airplane and is IMAA Legal.



The Great Planes Reactor has excelled under electric and glow power, as a biplane and a mono-plane. Now it really hits the big time by expanding to IMAA-legal dimensions with performance that's better than ever. At low speeds, the giant-scale Reactor flies true and solid. But for an all-out 3D machine, install a *0 cc gasoline engine and increase the throws!



Includes:

Pre-built and covered wings, fuselage and tail assemblies, pushrods, landing gear, wheels, wheel pants, cowl, fuel tank, wood servo trays, aluminum spinner two decal sheets, hardware package, photo-illustrated instructions



Requires:

Engine: 1.*0 - 2.*0 cu in (*6 - *4cc) two-stroke OR

2.*0 - 2.*0 cu in (*3 - *6cc) four-stroke OR

2.5 - 3.0 cu in (*3 - *0cc) gasoline OR

********0 Outrunner Brushless Motor

Radio: **6 channel, *-channel computer radio recommended

Servos: Eight, 7 high-torque, 1 standard ball bearing

6" (**2mm) Heavy Duty Servo Extensions: Two/inboard aileron control

*4" (**0mm) Heavy Duty Servo Extensions: Two/outboard aileron control

*6" (**4mm) Heavy Duty Servo Extensions: Three for tail servos

1.5" (*8mm) Large Scale Single Side Servo Arms: Seven

Y-Harness: Two heavy duty

Receiver Battery: 4.8 or 6V at least ***0mAh

Heavy duty switch harness and charge jack

#4 Plastic Washers: For cowl

Misc. Items: Building and field equipment



 



 Features:



        Made of laser cut balsa and plywood with a foam sheeted turtle deck

        Two-piece wings that bolt-on with aluminum joiner tube

        TopFlite MonoKote covering

        Pre bent aluminum landing gear, 0.*6" (4mm) thick

        Main wheels, 3.5" (*8mm) diameter foam, tailwheel, 1" (*5.4mm) rubber

        Radio compartment's hatch removes easily with four bolts

        Aluminum spinner, 3.*5" (*2.5mm) diameter

        Painted fiberglass cowl

        Painted fiberglass wheel pants

        Clear molded plastic canopy

        Dual servo aileron control

        Dual servo elevator control

        Approximately *4oz (**0cc) fuel tank for glow fuel, must purchase gasoline conversion kit and tubing if using gasoline engine

        Two piece composite engine mount

        Full set of hardware is provided, IMAA legal

        Assembly Time: Only ****0 hours

        Warranty Period (through the manufacturer): Great Planes guarantees this kit free from defects in both material and workmanship at the date of purchase.



 



 



spec :



    Wingspan: *4.5" (***0mm)



    Wing Area: ***6 sq in (**0.4 sq dm)

    Weight: *4 - *7 lb (6.*5 *7.*1 kg) depending on power setup selected

    Length: *5" (***0mm)

    Airfoil: Fully symmetrical

    Center of Gravity: 7" (**8mm) from the leading edge of the root wing rib

    Control Throws

    Low

    Elevator: 1" (*5mm) *0 degrees

    Rudder: **3/4" (*0mm) *6 degrees

    Ailerons: **1/2" (*8mm) *1 degrees

    High

    Elevator: **1/2" (*8mm) *5 degrees

    Rudder: **3/4" (**1mm) *8 degrees

    Ailerons: **1/2" (*4mm)  *9 degrees

    3D

    Elevator: **1/4" (*3mm) *4 degrees

    Rudder: **3/4" (**6mm) *5 degrees

    Ailerons: **1/2" (**4mm) *6 degrees