Precio FOB
Obtener el precio más reciente|
- Minimum Order
País:
China
N º de Modelo:
MPB102
Precio FOB:
Lugar de origen:
Changsha,Hunan
Precio de pedido mínimo:
-
Cantidad de pedido mínimo:
-
Detalle de embalaje:
-
El tiempo de entrega:
-
Capacidad de suministro:
-
Tipo de pago:
-
Grupo de productos :
-
Persona de contacto cindy
Changsha, Hunan
Feature
The product is one kind of sulfur silicone sealant with one acid
component which could be applied at any climate and could take
chemical reaction with the water in the air rapidly. Good
aging-resistant ability, high flexible, perfect performance of high
or low temperature resistant. Color: Clear, black, grey, blue,
red.
Main Composition
α, &branded;-Dihydroxyl Methyl Silicone
Scope of Application
This product used for gear case, fore-and-aft board, water pump of
car, auto bike, plane flange, cover board of other machine
equipment.
Using Method
1. Clean the surface to get rid of the rust, oil, or any
dirty.
2. Stick temporary band to protect the surface after
cleaning, and move the band off after applying of the glue.
3. Cut the bottleneck and fix the nozzle on, then, cut the
tube along the seam width.
4. Extrude the glue on the place to be sealed after fixing
the glue bottle on the gun. To promise the glue to be even and no
stopping, keep the extrusion continuous and the nozzle of the spray
gun move slowly. Bubbles or holes would enter if the gun moves too
quickly.
5. About *0 minutes later, to be dry. Keep the thick during
assembling. Would set after *4 hours at normal temperature.
Warning
1. It is not preferred for the applying at the air-tight
situation. Keep ventilative during the operation as the acetic acid
is released due to the chemical reaction.
2. No toxic of product. But be careful not to make the glue
get into the eyes or nose. Wash them at once if does.
3. Keep smooth and continuous during applying of the glue
onto the sealing surface. The adhesive performance would be not
good if the air get in.
4. Tighten the lid at once and take off the extrusion nozzle
after gluing to avoid entering of the wet air and causing of the
solidifying. Eliminate the remnants around the nozzle.
5. Operate at ***0Centigrade and humidity of ****0%.
Storage and Packing
1. The product is nonflammable. Keep dry and shade during
storage. The shelf life is 9 months in room temperature.
2. Packing specification: *5g/pc tube packing, *5g/pc tube
packing.
País: | China |
N º de Modelo: | MPB102 |
Precio FOB: | Obtener el precio más reciente |
Lugar de origen: | Changsha,Hunan |
Precio de pedido mínimo: | - |
Cantidad de pedido mínimo: | - |
Detalle de embalaje: | - |
El tiempo de entrega: | - |
Capacidad de suministro: | - |
Tipo de pago: | - |
Grupo de productos : | - |