GAO14 MD Bobbin winding machine

Descripción del producto

GAO*4 MD Bobbin winding machine 
 

Application:

GA**4MD Paper Cone winding machine is after Dyeing rewinding using, or thread rewinding using.

Main technical data:

*Type: Double sides(Groove Drum)

*Number of spindles: *0, *0, *0, **0 ,**0 (**0 as the standard spindle number)

*Spindle Gauge: **4mm

*Guide Traverse: **2mm

*Winding speed: ******0 meters/minute

*Bobbin: wooden bobbin- conical angle is 6°, Φ*5/Φ*2×**7mm

       Paper bobbin- conical angle is 3° *0′, 4°*0°, 5°*7°, 9°*5″

*Forming size: Φ**0 (big Dia) ×**2mm (length)

*Grooved drum: Bakelite drum with a diameter of Φ*2.5mm and 2.5 circles of anti-ribboning

*Yarn-break auto-stop device: Each spindle has an independent set of auto-stop device.

*Tension device: Each spindle has a set of tension gasket (which is divided into light, medium and heavy types).

*Yarn cleaning device: it can optional to install Popular type electronic yarn cleaner.

*Blank-bobbin conveyer device: It is equipped at the left and right side of the machine, and its used to convey blank bobbins from the head to the rear.

*Anti-ribboning device: it has a intermittent switch in the Electronic box to make the motor rotating turning on and off circularly. The intermittent time can be adjusted according to the different denier yarns speed. It has an electronic display in this device.

*Length counting device: it can be optional to install Electronic length counting device

*Bobbins putting shelf: equipped with Insert rod.

*Cop joint device: can optional to install Air splicer (or knot tying machine) .

*Waste yarn Cleaning device: it can optional to install GUO*3A type to-and-fro blowing cleanser on the machine.

*Operation mode: it can optional to install GUO*2 type dollies at both sides of the machine for convenient operation of workers.

*Motor Specification: Main Motor, 1.8Kw, **0V, and ***0 RPM, 2 sets.

Auxiliary Motor, 0.*7Kw, **0V, and **0 RPM, 1 set.

*Machine size: L****0 x W***0 x H***3mm (its **0 spindles size ).

The machine can optional install Electric Cleaner, Length counting device per spindle, time counting device, Frequency Inverter Controller, Air Splicer and etc.