Descripción del producto

 Core to core alignment by PAS technology
 ( PAS:Profile Alignment System)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display 
USB & VGA interface
Software upgrade via USB interface

Applicable fibers SM (ITU-T G.**2), MM (ITU-T G.**1), DS (ITU-T G.**3), NZDS (ITU-T G.**5)   
Fiber cleaved length 8~*6mm（Coating diameter：**0µm）   
*6mm（Coating diameter: **0 ~ ***0µm）   
Fiber diameter Cladding diameter：*0 ~**0µm 
 Coating diameter：**0~ ***0μm   
Fiber Count Single   
Fiber aligning method Core or clad aligning   
Image processing method Digital    
Actual average splice loss 0.*2dB （SM）, 0.*1dB (MM),
 0.*4dB (DS), 0.*4dB( NZDS)    
Splicing time Typical 9 sec，with standard SM fiber   
Splicing mode *3(templet), *0(user)   
Splice loss estimate More accurate   
Return loss ï¼ž*0dB   
Storage of splice result ***0 results，*0 parameter per result   
Fiber display and magnification **0X（X or Y view）,**0X（X and Y view）   
Tube heating time Typical *0 sec   
Tube heating mode 9(templet), *4(user)   
Tube heating temperature Can be adjusted   
Applicable Protection sleeve length *0mm, *0mm and a series of micro sleeves   
Tension test 2N   
Electrode life ***0   
No.of splice/heating with battery Typical **0 cycles (splice/tube heat) with inner Li-battery   
Display screen 5.6 TFT inch color LCD monitor   
Image change over The fiber image is turned upside down   
Terminals USB 1.1 and VGA   
Operating condition 0 ~ ***0m above sea level, 0 ~ *5%RH and **0～*0℃, respectively, Max. wind velocity of *5m/s   
Power supply AC ******0V with AC adapter; inner Li-battery(***0mAH)   
Dimensions **0mm(L) x**0mm (W) x**0mm (H)   
Weight 2.7 Kg excluding battery,3.2 Kg including battery