Precio FOB
Obtener el precio más reciente3000 ~ 5000 / Unit
|1 Unit Minimum Order
País:
India
N º de Modelo:
ACM-1612C
Precio FOB:
3000 ~ 5000 / Unit Obtener el precio más reciente
Lugar de origen:
New Delhi
Precio de pedido mínimo:
3000 per Unit
Cantidad de pedido mínimo:
1 Unit
Detalle de embalaje:
as per customer requirement
El tiempo de entrega:
4 to 5 week
Capacidad de suministro:
50 Unit per Week
Tipo de pago:
T/T, L/C
Grupo de productos :
Persona de contacto Sonia
Jaipur, Rajasthan
Fume hood ceiling are designed considering most efficient air
flow to the suction. These equipments are supplied in double skin
arrangement with inner lining that is made of non corrosive heat
resistant plastic and the outer skin is made out of power coated
CRC.
Fume hood ceiling are developed and designed to be used as semi conductor ventilated enclosures so as to protect the user from harmful and toxic fumes and vapors and to eliminate the possibility of accidental fire which may lead to emission of inflammable gases during the course of experiments. Hence, the materials of fume hoods are carefully chosen between industrial grades fire resistant commercial wooden boards covered with laminated sheets and lined completely with epoxy coating/FRP lining or corrosion resistant steel sheets having epoxy coating from inside, duly painted with attractive stove enamel/drying spray paint.
The work table is made of heavy gauge construction material
fortified with acid proof glazed tiles/stainless steel grade ss***4
grade. The work bench is provided with a small made of stainless
steel ss***4 grade. All fume hoods are provided with sliding sash
made of special grade shatter proof glass duly framed in wooden/
aluminum frame with sliding motion and counter weight balanced
mechanism.
Volume of exhaust
It is generally known that fume hoods are capable of maintaining a constant exhaust volume.
Testing procedures of contaminants
Fume hoods ceiling are specifically to decrease the loss of static pressure at a given baffle opening position. According to the standard procedures the average loss of static pressure at any given four points at ninety degree and 3 duct dia from the fume hood, that will not exceed *5 feet per minute at 0.*5 inch, with full slash opening and face velocity of **0 feet per minute.
Noise and sound levels
Our fume hood ceilings are designed with lower noise levels and the performance of these fume hoods are comparatively better than the industry standards of *0db, and approximately *5cm distance from the sash.
Illumination levels at work space
Our fume hoods ceiling make sure that a maximum of **0 lux light is available on the work table through diffuser fluorescent light arrangement.
Exhaust assembly
These fume hoods ceiling are incorporated with an extremely durable and strong exhaust system that generally persists a range of *******0 CM. These exhaust assembly comprises of balanced centrifugal impellers that are combined with a heavy duty three phase motor of Crompton greaves.
Exhaust ducting
These fume hood ceiling are also integrated with a FRP ducting of required dimension as per the requirements of the user.
Features
Technical Matrix
Constructions |
Industrial grade mica clad wooden board/ steel |
Table |
Stainless steel sheet table of ss***4 grade/ fortified acid proof glazed tiles |
Sink |
Stainless steel sink with tap |
Coating |
Epoxy coating/ FRP lined |
Air flow |
Unidirectional |
Air flow control |
Three step air flow speed controller |
Blower assembly |
Centrifugal lubricated bearing type ISI marked assembly |
Illumination |
Fluorescent light illumination greater than **0 lux on work table. |
Noise level |
Noise level less than *0 db |
Power requirements
|
**0 watts ***0 watts( model specific) |
Internal work space
|
4’x 2’x2’/5’x *1/2x *1/2 x 6x 3’x 3’ (length x depth x height) |
Nominal voltage |
***- **0 volts, *0Hz single phase |
Frequency |
*0 |
Model no |
Dimension (length x depth x height) |
Acm- Cafh****0 |
4’ x 2’ x 2’ |
Acm -Cafh****3 |
5’ x *1/2 x *1/2 |
Acm - Cafh ***3
|
6’ x 3’ x 3’ |
País: | India |
N º de Modelo: | ACM-1612C |
Precio FOB: | 3000 ~ 5000 / Unit Obtener el precio más reciente |
Lugar de origen: | New Delhi |
Precio de pedido mínimo: | 3000 per Unit |
Cantidad de pedido mínimo: | 1 Unit |
Detalle de embalaje: | as per customer requirement |
El tiempo de entrega: | 4 to 5 week |
Capacidad de suministro: | 50 Unit per Week |
Tipo de pago: | T/T, L/C |
Grupo de productos : | Chemical Hood |